West Bend Back to Basics SR1000 AutoServe Smoothie Maker Control Switches, Operation, Add Liquids

OPERATION

AutoServe Smoothie Maker Control Switches

LOW runs the unit at low speed. This speed should be used for the initial 30 seconds of mixing

READY LIGHT Indicates

that the power is on and the machine is ready

for use.

PULSE gives short bursts of power at high speed. Use PULSE to begin the mixing of ice and other hard ingredients.

OFF shuts off the

machine.

HIGH runs the unit at high speed. This speed should be used for the final stages of mixing.

NOTE : Dispense speed automatically engages when dispensing button is pushed.

ADD LIQUIDS

The AutoServe Smoothie Maker mixing container is conveniently marked to create perfect smoothies. To make your favorite frozen drinks, follow these simple steps:

ADD LIQUIDS

Add any combination of liquid ingredients up to the LIQUIDS mark on the mixing container under SERVES 2 or SERVES 4 . Liquids include any soft ingredients such as fruit, milk, fruit juice, herbal supplements or yogurt in any combination you think would be tasty.

We are, of course, partial to the Back to Basics smoothie mixes, which quickly and easily make three delicious 8-ounce smoothies.

ADD ICE

Add ice or frozen ingredients until the total level reaches the FROZEN INGREDIENTS line on the side of the mixing container. Frozen ingredients include ice, frozen fruit, frozen yogurt, ice cream, etc.

SMOOTH IT

With the lid locked into place and the stir stick set in the hole on the lid, pulse the mixture 2 or 3 times by pushing the PULSE button Next, push the LOW button and mix for 20-30 seconds. Push the HIGH button for the final 10-15 seconds of mixing. Turn the stir stick counter-clockwise for best mixing results.

9