Configuration
GENERAL PARAMETERS: |
| |
1. | System Password: | (undefined) |
2. | User Name: | (undefined) |
3. | Site ID: | (undefined) |
4. | Command Echo: | On |
5. | Inactivity Timeout: | 2 Mins |
6. | Command Confirmation: | On |
7. | Automated Mode: | Off |
8. | Manual Switch Button: | On |
9. | Command Prompt: | IPS |
A.Default Parameters
Enter Selection,
Press <ESC> to Exit ...
Figure 5.4: General Parameters Menu - Text Interface
•User Name: (Optional) The User Name allows you to set up an additional layer of security for web access to command mode by requiring that users correctly enter a name in addition to a password. Note that the User Name is only required when the unit is accessed via the Web Browser Interface. (Four to 16 Characters, Default = undefined.)
Notes:
•If a User Name is defined, then users who login with a Plug Password (User Mode) will also need to enter this same User Name at the login prompt when attempting to access command mode via the Web Browser Interface.
•The User Name cannot begin with a forward slash (/) or backslash (\) character.
•The User Name cannot include non printable characters, space characters, asterisks (*) or quotation marks.
•Site ID: Defines a brief text message, which can describe the location of the IPS unit. (Up to 32 characters, Default = undefined.)
Notes:
•The Site ID Message cannot begin with a forward slash (/) or backslash (\) character.
•The Site ID Message cannot include non printable characters or quotation marks.
•Command Echo: When enabled, ASCII commands sent via the Text Interface will be echoed back, allowing keystrokes to be displayed. This feature applies only to the Text Interface, and has no visible effect on the Web Browser Interface. (Default = On.)
