IPS-800/IPS-1600 Series - User’s Guide
•Inactivity Timeout: Determines how long the IPS will wait for additional commands during periods of inactivity. When the Timeout Period elapses, the user will be disconnected from the IPS command mode. (Default = 2 Minutes.)
•Command Confirmation: When enabled, the IPS will display a confirmation prompt before executing certain commands. When disabled, the prompt will be suppressed and commands will be executed immediately. (Default = On/Enabled.)
•Automated Mode: When enabled, the IPS will execute On, Off, Boot, and exit commands without displaying a confirmation prompt, status screen or confirmation messages. For more information, please refer to Section 6.4. (Default = Off.)
Note: When this option is enabled, security functions are suppressed, and users are able to access configuration menus and control plugs without entering a password. If security is a concern and the Automated Mode is required, it is recommended to use the IP Security feature (Section 5.3.4.1) to restrict access.
•Manual Switch Button: Enables and configures the Default Button’s manual plug control function, but does not effect the Default Button’s ability to reset parameters to default values. (Default = "On".)
▪Off: Disables the manual plug control function.
▪On: Enables manual plug control. When Default is pressed and held for three seconds, all outlets will be toggled On or Off.
•Command Prompt: Allows the Text Interface command prompt to be set to either "IPS", "NPS", or "NBB." (Default = IPS.)
