Westinghouse LD-3237 user manual External Device Connections, English

English

EXTERNAL DEVICE CONNECTIONS

•A position on the RF switch (not supplied) – You can view all unscrambled channels by using the TV's channel keys.

•B position on the RF switch (not supplied) – You can view the scrambled channels via the converter/descrambler by using the converter's channel

keys.

RF switch (not supplied)
	A	Two-set
		signal
OUT	IN		Cable TV line
		splitter
	B	(Not
		supplied)
	Cable TV
	converter/descrambler
	(Not supplied)

EXTERNAL DEVICE CONNECTIONS

IMPORTANT:

•Turn off the LED TV first before connecting an external device to prevent any possible damage or physical injury.

•For more information about external device connections, see the operation manual of the external device you wish to connect to the LED TV.

•Make sure that the correct cables are connected to each terminal. Improper cable connections may cause damage to the LED TV.

You can enjoy picture and sound by connecting various audio-video devices to the terminals located on the rear and side I/O panels of the LED TV.

•TV cable input – You can use a commercially available audio/video cable.

•Component (YPbPr) input – Picture can be displayed only when a 480i, 480P, 720P or 1080i signal is received.

•HDMI input – Picture can be displayed only when a 640 x 480, 480P, 720P or 1080i signal is received. When you connect to the HDMI terminal with a DVI-HDMI conversion cable, there is a possibility that the picture may not display correctly.

•Audio output – You can output audio signals from the LED TV set through the analog audio out and SPDIF terminals.

18