Westinghouse UW32S3PW manual Outdoor Antenna Connection, Cable TV CTV/DTV Connection

ANTENNA CONNECTION

ANTENNA CONNECTION

OUTDOOR ANTENNA CONNECTION

Cable TV lead in

VHF, UHF or VHF/UHF combination antenna

75 ohm coaxial cable (round)
300-75 ohm ADAPTER	RF IN
300 ohm twin-lead (flat) (Not supplied)
Separate VHF/UHF Antenna
VHF Antenna UHF Antenna	Home Antenna
	terminal (75 ohm)

300 ohm twin-lead COMBINER

(Not supplied) 300 ohm twin-lead

IN OUT

75 ohm coaxial cable

NOTE:

The F-type connector should be finger-tightened only. When connecting the RF cable to the LED TV, do not tighten F-type connector with any tool. If tools are used, it may cause damage to the LED TV (e.g. breaking of internal circuit).

CABLE TV (CTV/DTV) CONNECTION

The unit has a TV tuner (75 ohm coaxial cable connector) located on the rear I/O panel for easy cable hookup. When connecting the 75 ohm coaxial cable to the unit, screw the 75 ohm cable to the TV tuner. Some cable TV companies offer premium pay channels. Since the signals of these channels are scrambled, a cable TV converter/descrambler is usually provided to the subscriber by the cable TV company. This converter/descrambler is necessary for normal viewing of the scrambled channels. (Set your TV to channel 3 or 4. Typically one of these channels is used. If a channel is unknown, consult your cable TV company.) For more specific instructions on installing cable TV, consult your cable TV company. One possible method of utilizing the converter/descrambler provided by your cable TV company is explained below.

17

English