MOUNTING AND WIRING INSTRUCTIONS

NOTE: Underwriters Laboratories (UL) does not require all fixtures to have ground wires. These fixtures meet all UL specifications.

1.Turn off power at circuit box to avoid possible electric shock.

2.Secure mounting bar (A) to outlet box (B) with outlet box screws (C) (not included) (see fig. 1).

3.Thread hex nut 1 (D1) onto mounting nipple (E) approximately 1/4 inch and insert lock washer (F), then thread mounting nipple (E) onto mounting bar (A) and secure hex nut 1 (D1).

4.Thread hex nut 2 (D2) onto nipple 1 (G1), then thread nipple 1 (G1) into coupling 1 (H1) and secure with hex nut 2 (D2).

5.Slide top cover (I) down over nipple 1 (G1) and secure with fixture loop (J).

NOTE: Do not twist or kinkwires when sliding top cover (I) and fixture loop (J) downward.

6.Thread hex nut 3 (D3) onto nipple 2 (G2), then thread nipple 2 (G2) into coupling 2 (H2) and secure with hex nut 3 (D3).

7.Place bottom cover (K) over nipple 2 (G2) and secure with finial (L).

8.Open one link on bottom end of chain (M). Attach to fixture loop (J). Securely close link on chain (M).

9.Thread screw collar ring (N) onto screw collar (O), then place canopy (P) over top of screw collar (O).

10.Lace wires up through every other link on chain (M) then through screw collar (O), canopy (P), and mounting nipple (E).

11.Open one link on top end of chain (M). Attach to loop on screw collar (O). Securely close link on chain (M).

12.Identify color coding of fixture wires (see fig. 2).

13.To connect wires, take black fixture wire (group A from fig. 2) and place evenly against black outlet box wire. Do not twist wires.

14.Fit wire connector (Q from fig. 1) over wires and twist until there is a firm connection. If wire connector (Q) easily comes off, reattach and check again for a firm connection.

15.Repeat steps 13 and 14 with the white (group B from fig. 2) fixture wires and outlet box wires.

16.Partially thread green grounding screw (R) into side hole (S) on mounting bar (A) (see fig. 1).

17.Wrap ground wire from fixture around green grounding screw (R) leaving enough excess wire to then connect ground wire and outlet box wire with wire connector (Q), if applicable.

18.Tighten green grounding screw (R). Do not over tighten.

19.Remove screw collar ring (N) from screw collar (O) and secure screw collar (O) to mounting nipple (E).

20.Tuckwires inside outlet box (B).

21.Raise canopy (P) to ceiling and secure screw collar ring (N) to screw collar (O).

FIXTURE ASSEMBLY INSTRUCTIONS

Warning: This fixture is for indoor use only.

1.Place glass trim (T) over glass shade(s) (U), then place glass shade(s) (U) into holder(s) (V) and secure with screws (W) or retaining ring(s) (X), whichever is applicable (see fig. 1).

2.Install lamp(s). Do not exceed recommended wattage.

3.Turn power back on at circuit box.

4

Page 3 Page 5
Page 4
Image 4
Westinghouse W-194, 31705 owner manual Mounting and Wiring Instructions, Fixture Assembly Instructions
Page 3 Page 5

31705, W-194 specifications

The Westinghouse 31705, W-194, is a notable advancement in the realm of smart home technology, combining modern design with practical functionality. This innovative device brings a suite of features that enhances convenience, energy efficiency, and automation, making it an attractive addition to any home.

One of the main features of the Westinghouse 31705, W-194, is its compatibility with various smart home ecosystems. It supports integrations with popular platforms such as Amazon Alexa, Google Assistant, and Apple HomeKit, allowing users to control their lighting and appliances through voice commands or mobile apps. This seamless connectivity empowers homeowners to create customizable routines, ultimately leading to a more intuitive living environment.

The device is equipped with advanced energy-monitoring capabilities, which provide real-time feedback on power consumption. Users can monitor their energy usage directly from their smartphones, enabling them to identify areas where they can reduce costs and streamline consumption. This feature not only promotes sustainability but also helps in cutting down on unnecessary electricity expenses.

Another key characteristic of the Westinghouse 31705, W-194, is its user-friendly interface. The device features a touchscreen display that is both intuitive and responsive, making navigation effortless for users of all ages. Customization options allow users to adjust settings according to personal preferences, creating a tailored smart home experience.

Moreover, the W-194 incorporates advanced scheduling technology that lets users program their devices to turn on or off at specific times. This automation capability is particularly useful for managing home security, as users can simulate occupancy by scheduling lights to turn on and off, providing peace of mind during vacations or long periods away from home.

The Westinghouse 31705, W-194, is also designed with durability and safety in mind. The device is built with high-quality materials, ensuring a long lifespan while adhering to safety standards. Features like surge protection and temperature monitoring further enhance its reliability, providing users with confidence in their investment.

In summary, the Westinghouse 31705, W-194, stands out in the smart home market due to its versatile features, such as compatibility with major smart ecosystems, energy monitoring capabilities, user-friendly interface, scheduling technology, and robust safety measures. These characteristics make it an ideal choice for homeowners seeking to embrace the future of home automation while enhancing convenience and energy efficiency.
Top Page Image Contents