USER INSTRUCTIONS: WH-S8 & WH-S10 SUBWOOFER

A/V Processor Connections

Your subwoofer has been designed for optimum performance with a digital processor. If your A/V processor has a line level or LFE subwoofer output you should use this connection. You will need to purchase a single screened RCA phono lead from your dealer. Connect this lead to the LFE input of the subwoofer as shown.

Alternatively, you may use a split mono lead from the processor to Line Inputs of the subwoofer. In this case the input level at the subwoofer will be slightly higher.

Stereo Line Output Connections

If your amplifier has a spare preamplifer output or a stereo subwoofer output, connect the subwoofer as shown. You will need a stereo screened RCA phono cable.

Pre Out – Main in Connections

If you use a stereo pre and power amplifier, or an amplifier where the pre and main amplifier cab be separated, connect the subwoofer as shown. There are two alternative methods.

You will need two screened RCA ‘Y’ adaptors and two single RCA phono cables.

Remove the Pre-Main links on your amplifier. Connect the socket (common) of an RCA ‘Y’ adaptor to the Left Channel Pre Out socket on the amplifier and the other leg to the Left Channel Main In socket. Connect the remaining plug on this combination to the Left Channel Line Level input on the subwoofer. Repeat this for the Right Channel.

AV AMPLIFIER

RIGHT

LEFT

CENTRE

RIGHT

LEFT

 

REAR

FRONT

Subwoofer Out (Line Level)

 

RIGHT

LEFT

CENTRE

RIGHT

LEFT

 

REAR

FRONT

 

 

AV AMPLIFIER

 

L

 

 

 

 

 

R RIGHT

LEFT

CENTRE

RIGHT

LEFT

 

REAR

FRONT

Stereo Outputs (Line Level)

 

 

 

 

 

 

(x2)

PRE

MAIN

 

 

 

OUT

 

IN

 

 

 

 

L

AMPLIFIER

 

 

 

R

 

 

 

 

 

 

 

 

 

 

 

RIGHT

LEFT

Pre – Amp and Power Amp Connections

You will need two stereo (or four single) screened RCA cables. Connect a stereo cable from the Line Level Inputs of the subwoofer to the Output sockets of the pre-amplifier. Now connect a second stereo cable from the Line Level (High pass) Outputs of subwoofer to input sockets of the power amplifier. Make sure that the Right and Left Channels are not mixed up! The built-in high pass filter will roll off the low frequency output to the power amplifier and subsequently the main speakers.

PRE-AMPLIFIER OUTPUT

POWER AMPLIFIER INPUT



Page 6
Image 6
Wharfedale WH-S8 & WH-S10 manual Processor Connections, Stereo Line Output Connections, Pre Out Main in Connections

WH-S8 & WH-S10 specifications

Wharfedale, a renowned British audio manufacturer, has recently introduced two impressive subwoofer models: the WH-S8 and WH-S10. Both of these subwoofers are engineered to deliver exceptional audio performance and complement any home theater or music setup. Let's delve into the main features, technologies, and characteristics that set these subwoofers apart.

The WH-S8 is equipped with an 8-inch driver, while the WH-S10 features a larger 10-inch driver, catering to different preferences when it comes to bass reproduction. The drivers are crafted using advanced materials that ensure durability and optimal performance. The cone design contributes to precise lows, providing an impactful listening experience without compromising clarity.

One of the standout features of both models is their impressive power handling capacity. The WH-S8 boasts a power output of 200 watts while the WH-S10 elevates this to 300 watts. This robust amplification allows for dynamic range and deep bass response, perfect for both cinematic moments and music performances. The built-in Class D amplifiers ensure high efficiency, leaving less wasted energy and keeping the heat generation to a minimum.

Both subwoofers utilize Wharfedale's proprietary technologies to enhance sound fidelity. The Low-Frequency Optimization (LFO) technology improves the subwoofers' low-end response, allowing users to experience deeper bass tones in music and movie soundtracks. Additionally, the driver design helps reduce distortion, ensuring that what you hear remains true to the original sound, enriching the overall audio experience.

The WH-S8 and WH-S10 also feature adjustable crossover settings, enabling listeners to customize the frequency range at which the subwoofer operates. This feature is essential for integrating the subwoofers effortlessly with satellite speakers, allowing for a balanced soundstage that doesn’t overpower midrange and high frequencies.

Moreover, both models include volume control options and phase adjustment capabilities, providing flexibility in tuning the sound to suit different room acoustics and personal preferences. The enclosures are constructed with high-quality MDF, which not only enhances durability but also minimizes cabinet resonances, ensuring clean sound reproduction.

In summary, the Wharfedale WH-S8 and WH-S10 subwoofers stand out for their solid construction, powerful performance, and advanced technologies. Whether you are a movie enthusiast or a music lover, these subwoofers promise to enhance your audio experience with their deep and precise bass performance, making them a worthy addition to any entertainment system.