Whirlpool 1328891 manual Filter Reset, Mode, RapidCoolTM Control, Fan Speed, Temperature

Mode

1.Press MODE repeatedly until you see the symbol glow for the desired setting.

Mode

2.Choose Cooling, Dry, or Fan Only.

■Cooling—Cools the room. Press FAN SPEED to select Auto, High, Mid or Low. Press the up or down Adjust button to adjust the temperature.

■Dry—Dries the room. The air conditioner automatically selects the temperature. The fan runs on Low speed only.

NOTE: Dry mode should not be used to cool the room.

■Auto—automatically controls the fan speed depending on the current room temperature and temperature control setting.

NOTE: Auto fan speed cannot be selected in Fan Only mode.

■High—for maximum cooling

■Mid—for normal cooling

■Low—for quieter cooling

■Fan Only—Only the fan runs. Press FAN SPEED to select High, Mid or Low.

NOTE: Auto fan speed cannot be selected in Fan Only mode.

RapidCoolTM Control

Used for fast cooling. The air conditioner automatically sets the fan speed to High and the temperature to 64°F (18ºC).

1.Press RAPIDCOOLTM control. The air conditioner automatically sets the fan speed to High and the temperature to 64ºF (18ºC).

2.To turn off RapidCoolTM control, press any button on the remote control or control panel except Timer On, Timer Off and Swing.

Fan Speed

1.Press FAN SPEED repeatedly to choose the desired fan speed.

Fan

Speed

2.Choose Auto, High, Mid or Low.

Filter Reset

1.When the Filter Reset indicator light is lit, remove, clean and replace the air filter. See “Cleaning the Air Filter.”

2.Press and hold FILTER RESET for 3 seconds after replacing the air filter.

Filter

Reset

NOTE: After 360 hours of fan operating time, the Filter Reset indicator light will turn on. It will remain on for 180 hours or until you press FILTER RESET. After 180 hours, the Filter Reset indicator light will turn off automatically.

Temperature

■Press the up Adjust button to raise the temperature. Press the up Adjust button once to increase the set temperature by 2ºF (1ºC), or press twice to increase the set temperature by 4ºF (2ºC).

■Press the down Adjust button to lower the temperature. Press the down Adjust button once to decrease the set temperature by 2ºF (1ºC), or press twice to decrease the set temperature by 4ºF (2ºC).

NOTES:

■In the Cooling mode, the temperature can be set between 64ºF and 90ºF (18ºC and 32ºC).

■In Fan Only mode, the temperature cannot be set.

9