Whirlpool 1328891 Installation Instructions, UnpacktheAirConditioner, Remove packaging materials

Models: 1328891

1 44
Download 44 pages 32 Kb
Page 5
Image 5
To test your power supply cord:

INSTALLATION INSTRUCTIONSWARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

2.Press RESET (on some devices, a green light will turn on).

3.Press TEST (listen for click; Reset button will trip, and on some devices, a green light will turn off).

4.Press and release RESET (listen for click; Reset button will latch, and on some devices, a green light will turn on). The power supply cord is ready for operation.

NOTES:

The Reset button must be pushed in for proper operation.

The power supply cord must be replaced if it fails to trip when the test button is pressed or fails to reset.

Do not use the power supply cord as an off/on switch.

A damaged power supply cord must be replaced with a new power supply cord obtained from the product manufacturer and must not be repaired.

The power supply cord contains no user serviceable parts. Opening the tamper-resistant case voids all warranty and performance claims.

To test your power supply cord:

1.Plug power supply cord into a grounded 3 prong outlet.

INSTALLATION INSTRUCTIONS

UnpacktheAirConditioner

UnpacktheAirConditionerWARNING

Excessive Weight Hazard

Use two or more people to move and install air conditioner.

Failure to do so can result in back or other injury.

Remove packaging materials

Remove and dispose of/recycle packaging materials. Remove tape and glue residue from surfaces before turning on the air conditioner. Rub a small amount of liquid dish soap over the adhesive with your fingers. Wipe with warm water and dry.

Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove tape or glue. These products can damage the surface of your air conditioner.

InstallPortableAirConditioner

Install Exhaust Hose and Adapter

1.Roll the air conditioner to selected location. See “Location Requirements.”

2.Insert the hose adapter into the slot on the back of the air conditioner.

3.Slide down to lock the hose into place.

A

B

C

A. Evaporator air intake

B. Hose adapter

C. Flexible exhaust hose

5

Page 5
Image 5
Whirlpool 1328891 manual Installation Instructions, UnpacktheAirConditioner, InstallPortableAirConditioner, A B C