To get the most efficient use from your new dryer, read your Use and Care Guide. Keep Installation Instructions and Guide close to the dryer for easy reference.
Recessedand closet installation in!structions
The dryer may be installed in a recessed area or closet.
If the dryer is installed in a closet, the dryer MUST be exhausted outside
Failure to do so may result in a fire.
To prevent large amounts of lint and moisture from accumulating, to maintain drying efficiency and to prevent exposure to possible health hazards, this dryer MUST be exhausted outdoors.
The installation spacing is in inches and centimeters and is minimum allowable.
Additional spacing should be considered for ease of installation, servicing and compliance with local codes and ordinances.
Closet door must have minimum air openings for adequate air flow. Louvered doors with equivalent air
openings are acceptable. (See diagrams at right.) Other installations must use the minimum dimensions indicated. Companion appliance spacing should be considered.
For recessed,
recessed front view
L LL00
l&.7 cm)
T
4- 0”’ (0 cm)
Minimum installation spacing
Closet installation must be exhausted.
side view
closet door
\
14” max (35.7 cm,
p**
(10.2 cm)
front view
closet door
4
48sq. in.**
(310 sq. cm)-
t
24 sq. in.**
(155 sq. cm)-
t
*Additional clearances for wall, door and floor moldings may be required.
l * Opening is minimum for closet door. Louvered door with equivalent air openings is acceptable.
l ** Additional space is needed when external exhaust elbow is used.
Page 10
