STEP 5: INSTALL THE MOUNTING PLATE TO THE WALL

THE OVEN MUST BE CONNECTED TO AT LEAST ONE WALL STUD.

1.Draw a vertical line on the wall at the center of the 30" wide space.

Use the mounting plate as the template for the rear wall. Place the mounting plate on the wall, making sure that the tabs are against the bottom of the cabinet. Line up the notch and center line on the mounting plate to the center line on the wall.

2.While holding the mounting plate with one hand, draw circles on the wall at holes "A", "B", "C" and "D". Four holes must be used for mounting. If the holes are not used, the installation will not be secure. Installer must use these holes for proper installation. Use toggle bolts through these holes unless one of them lines up with a stud. Use a wood screw for studs. See Figure 26.

NOTE: Draw a fifth circle inside area "E", through one of the holes to match the location of a stud.

For wall vented: The oven requires a rear wall cutout opening for the rear wall duct and the exhaust adaptor must be attached to the Back of oven. See the next page on how to prepare the rear wall cutout opening and the exhaust adaptor/mounting plate for wall vented.

3/16" Hole on Studs 3/,_" Hole on Drywall Only

[ Minimum 66" I

For Wall_-

L ven,.o,.

[

Draw Lines

i

;

on Studs

', ',

 

Draw

_

t

i

_

J

l

SuppoH

Tab

 

Suppo_

Tab

3.Drill holes through the circles. If there is a stud, drill a 3/16" hole for lag screws. Two or preferably four lag screws at holes "A" and "C", or "B" and "C" must be used to secure mounting plate to wall. If there is no stud, drill a 3/4" hole for toggle bolts. Make sure to use at least 1 lag screw at holes of area "E" in a stud, and 4 toggle bolts at holes "A", "B", "C" and "D" in the drywall or the plaster.

4.Attach the plate to the wall. To use spring toggle head bolts: Remove the toggle wings from the bolts. Insert the bolts into the mounting plate and replace the spring toggle heads to 3/4" past the bolt ends. Insert the spring toggle heads into the holes in the wall to mount the bracket. You may pull forward on the bracket to help in tightening the toggle bolts. Tighten all bolts. See Figure 27.

Figure 26

Space More Than Wall Thickness

I Toggle Wings

Mounting i __,11 I

P'ate"._!li: ,,, Togg'eBo'tH:!k

"i_IUi")i_ _m¢'-"II I1_\ .,4_.,,.,,EndBolt.,

Figure 27

15

Page 15
Image 15
Kenmore 721.80523, 721.80524 Install the Mounting Plate to the Wall, Oven Must be Connected to AT Least ONE Wall Stud

721.80523, 721.80522, 721.80409, 721.80402, 721.80529 specifications

The Kenmore 721 series, which includes models 721.80524, 721.80404, 721.80403, 721.80529, and 721.80402, represents a line of advanced over-the-range microwaves that seamlessly combines functionality with modern design. Key elements across these models include a powerful cooking performance, advanced features, and energy efficiency, making them ideal for contemporary kitchens.

A standout characteristic of these models is the impressive wattage, typically ranging between 1000 and 1100 watts, allowing for quick and efficient cooking. This power is complemented by multiple power levels that enable users to tailor their cooking settings for various tasks, from defrosting to reheating and intense cooking scenarios.

Incorporating sensor cooking technology, these microwaves automatically adjust cooking time and power levels based on the moisture released during the cooking process. This feature ensures consistently perfect results, reducing the guessing game that often accompanies microwave cooking. The inclusion of dedicated one-touch cooking options for common foods enhances user convenience, as simple buttons can be pressed for popcorn, baked potatoes, and more.

The Kenmore 721 series also prioritizes user-friendly controls, often featuring a digital display and intuitive push-button interface. The controls are designed to be easy to operate, even for those with limited experience in using kitchen appliances.

Additionally, the built-in venting system found in these over-the-range microwaves not only aids in ventilation but also enhances the overall kitchen environment. The strong ventilation fan effectively eliminates smoke, steam, and odors, ensuring a fresher cooking space.

Moreover, the design aesthetics of the Kenmore 721 models reflect modern sensibilities, often available in sleek stainless steel finishes that match various kitchen decors. With a spacious interior capable of accommodating larger dishes, users appreciate the generous capacity for both cooking and reheating.

Overall, the Kenmore 721.80524, 721.80404, 721.80403, 721.80529, and 721.80402 offer an ideal combination of power, convenience, and style. These models fit seamlessly into modern kitchens while providing the efficiency and reliability necessary for everyday cooking tasks. With their advanced features and user-friendly design, they stand out as excellent choices for those looking to enhance their culinary experience.