PARTS, TOOLS, MATERIALS
YOU WILL NEED THE FOLLOWING TOOLS AND MATERIALS FOR THE
INSTALLATION:
Carton or other heaw material for covering the counter top.
Clear Tape
(for taping the templates to the wall)
0ISaber Saw (for cutting vent holes for roof or wall vending)
Stud Finder or Thin Nail
Keyhole Saw (for the power cord hole)
Electric drill
Phillips Screwdriver (for the screws)
Pencil
Flat Blade Screwdriver (for the toggle bolts)
Measuring Tape (metal preferred)
Small Side Cutters or Tin Snips
3/8" and 3/4" wood drill bits
1/2" and 3/16" drill bits
Plumb Line
Duct Tape
Caulking gun
•If you have brick or masonry walls, you need special hardware and tools.
•The ductwork you need for the installation is not included. All wall and roof caps must have a