STEP 3:
PREPARE THE VENTING BLOWER
ROOF VENTED INSTALLATION:
1.Remove two blower unit mounting screws and
one or two blower plate mounting screws. Remove the blower plate from cabinet. See Figure 18.
2.Carefully lift the blower unit out of the microwave oven.
3.Rotate blower unit 90° so the exhaust ports face the top of the cabinet. See Figure 19.
4.Place blower unit back into microwave oven.
5.Use side cutters or tin snips to cut and remove knockouts "A" from blower plate. Discard knockouts. Be careful not to distort the plate. See Figure 20.
6.Reattach blower plate to microwave oven. Attach with the one blower unit mounting screw and one or two blower plate mounting screws. See Figure 21.
blower plate
mounting screws
blower plate
bl,
mounting screws
Figure 18
blower unit
Figure 19
Knockouts "A"
/
blower plate
Figure 20
blower unit
blower plate
mounting screw
blower plate | blower unit |
| mounting screw |
Figure 21
12