5
Hose connector
Locking collar
Water flow
button
Faucet adapter
PORTABLE ONE-FAUCET CONNECTION
NOTE: Make sure the lid is closed before
moving the washer.
Use the hose connector provided with the washer
for a one-faucet connection.
To convert Model LCR5232H for portable installa-
tion, call our Consumer Assistance Center number
at 1-800-253-1301 from anywhere in the U.S.A. In
Canada, call your authorized Whirlpool dealer.
Set the Temperature Selector to Warm/Warm or
to Warm/Cold (depending on your model).
Attach the hose connector to the faucet adapter
by pulling down on the locking collar while lifting
up on the connector until it snaps into place.
Slowly turn the water faucet on all the way.
Pull the electrical power cord from the storage
area in the back of the washer. Plug the power
cord into a 3 prong grounded outlet.
Water temperature adjustment:
Adjust water temperature as follows:
Wash Water:Adjust faucets for wash water
temperature prior to the fill for wash.
Rinse Water:Adjust faucets for temperature prior
to fill for rinse.
NOTE: Always use cold rinse water for permanent
press fabrics.
WASHER INSTALLATION
ELECTRICAL REQUIREMENTS

wWARNING

Electrical Shock HazardPlug into a grounded 3 prong outlet.Do not remove ground prong.Do not use an adapter.Do not use an extension cord.Failure to follow these instructions can result in death, fire, or electrical shock.
A 120-volt, 60-Hz., AC-only, 15-or 20-ampere fused
electrical supply is required. Time-delay fuse or circuit
breaker is recommended.
GROUNDING INSTRUCTIONS
For your personal safety, this washer must be
grounded. Check with a qualified electrician or
serviceman if you are in doubt as to whether the
appliance is properly grounded. Do not modify the
plug provided with the appliance - if it will not fit the
outlet, have a proper outlet installed by a qualified
electrician.
Model LCR7244H comes equipped for portable installation.
Model LCR5232H comes equipped for permanent installation.
Both models can be converted to portable or permanent installation. In the U.S.A., call our Consumer
Assistance Center and in Canada, contact your authorized Whirlpool dealer to obtain kit numbers.