REFRIGERATOR FEATURES
Your model may have some or all of these features. Features that can be purchased separately as product accessories are labeled with the word “Accessory.” Not all accessories will fit all models. If you are interested in purchasing one of the accessories, please call the
Important information to know about glass shelves and covers:
Do not clean glass shelves or covers with warm water when they are cold. Shelves and covers may break if exposed to sudden temperature changes or impact, such as bumping. For your protection, tempered glass is designed to shatter into many small,
Refrigerator Shelves
Your model may have glass or wire shelves. Store similar foods together and adjust the shelves to fit different heights. This reduces the time the refrigerator door is open and saves energy.
Shelves and Shelf Frames (Fixed and
To Remove and Replace a Shelf:
1.Pull the shelf forward to the stop. Tilt the front of the shelf up. Lift to remove from the shelf supports.
2.Replace the shelf/frame by aligning the shelf with the shelf supports. Slide the shelf onto the shelf supports. Be sure that the shelf is securely in position.
Deli Bin
The deli drawer stores raisins, nuts, spreads, and other small items at normal refrigerator temperatures.
To Remove and Replace the Deli Bin:
1.Remove the deli bin by sliding it straight out to the stop. Lift the front and back of the bin up and out of the shelf supports. Tilt the bin sideways to remove from the refrigerator compartment.
2.Replace the deli bin by sliding it back past the stop and pushing into place.
Convertible Vegetable/Meat Drawer,
Crisper and Covers
(on somemodels)
Crisper and Convertible Vegetable Meat Drawers
To Remove and Replace Drawers:
1.Slide crisper or meat drawer straight out to the stop. Lift the front of drawer with one hand while supporting the bottom of drawer with other hand and slide the drawer out the rest of the way.
2.Replace the crisper or meat drawer by sliding it back in fully past the drawer stop.
Crisper or Vegetable/Meat Drawer Covers
To Remove and Replace Covers:
1.Remove the crisper and meat drawers. Press up in center of crisper glass insert until it rises above the plastic frame. Holding the crisper glass firmly, slide the glass insert forward to remove.
2.Lift crisper cover frame and remove. Repeat steps to remove the meat drawer cover.
3.Replace back of meat drawer cover frame into supports or slides on side walls of the refrigerator and lower or slide the front of the cover frame into place.
4.Slide rear of glass insert into cover frame and lower front into place. Repeat steps to replace the crisper cover.
Wine Rack
(onsomemodels- Accessory)
To Install and Remove the Wine Rack:
1.Install the wine rack by aligning it with the three shelf tabs located on the bottom of the shelf. Pull the wine rack straight down until it locks onto the shelf tabs as shown.
2.To remove the wine rack, lift it straight up and off the shelf tabs.
Utility Bin
(onsomemodels- Accessory)
NOTE: For
40
