Dispenser Light (on some models)
Style 1
Reach through the dispenser area to remove and replace the light bulb.
A
A. Dispenser Light
Style 2
The dispenser lights are LEDs which should not need to be changed. If it appears that your dispenser lights are not working, check to be sure that the light sensor is not blocked (in Night Light mode). See “Troubleshooting” for more information.
Refrigerator Control Panel Light
Reach behind the refrigerator control panel to remove and replace light bulb.
Crisper Lights
■If necessary, remove the top crisper drawer to gain access to the crisper light shield. Remove the light shield by lifting the ends out of the brackets as shown.
■Replace the light shield by inserting the ends into the brackets. If necessary, replace the top crisper drawer.
Style 2
■Remove the light shield by grasping the sides and squeezing in toward the center and while pulling forward the shield.
■Replace the light shield by fitting the tabs into the slotted holes in the freezer liner. Push in the shield until it snaps into place.
Lower Freezer Light (on some models)
Style 1 - Beneath Ice Bin
■Remove the light shield by grasping the sides and squeezing in toward the center. Once the side hooks of the shield are free from the freezer lining, pull down the shield.
■Replace the light shield by squeezing the sides toward the center and inserting the shield side hooks into the slotted holes. Once the side hooks are in place, snap the front tab into the slotted hole.
Style 2 - Behind Freezer Basket
■Depending on your model, remove the top freezer basket or the top freezer basket shelf. Remove the light shield by removing the Phillips screw on the top of the shield. Slowly rotate the shield until the left tab can be gently pulled from the freezer wall.
■Replace the light shield by inserting the left tab into the freezer wall. Align the top tab with the screw hole and replace the screw.
Upper Freezer Light (on some models)
Style 1
■Remove the light shield by grasping the top center of the shield and pulling forward while turning it slightly to one side. If necessary, remove the top crisper drawer to access crisper light shield.
■Replace the light shield by inserting the tabs on one end into the slotted holes in the refrigerator or freezer liner. Then, slowly bend the shield at the center to insert the tabs on the other end.
43
