Whirlpool 8ET17NK, 3ET16NK Removing the drop-indoor trim pieces, Removing the snap-offdoor trim

Models: 3ET16NK 8ET17NK

1 26
Download 26 pages 40.14 Kb
Page 10
Image 10
Removing the drop-in door trim pieces

Removing the drop-in door trim pieces

To remove the trim piece:

1.Remove all items from the shelf.

2.Pull straight up on the trim piece at each end.

To replace the trim piece:

1.Locate each end of the trim piece above the trim pocket opening.

2.Push the trim piece straight down until it stops.

3.Replace items on the shelf.

Removing the snap-off door trim

To remove the trim piece:

1.Remove all items from the shelf.

2.Pull out on the inside tab at each end of the trim piece.

3.Lift trim piece straight out.

To replace the trim piece:

1.Line up ends of the trim piece with the button on the door liner wall.

2.Push trim piece straight back until it snaps securely into place.

3.Replace items on the shelf.

Removing the snap-off door trivets

To remove the trivet:

1.Remove all items from the shelf.

2.Pull out on the inside tab at each end of the trivet.

3.Lift trivet straight out.

To replace the trivet:

1.Line up ends of trivet with the button on the door liner wall.

2.Push trivet straight back until it snaps securely into place.

3.Replace items on the shelf.

Page 10
Image 10
Whirlpool 8ET17NK Removing the drop-indoor trim pieces, Removing the snap-offdoor trim, Removing the snap-offdoor trivets