Removing the base grille
To remove the base grille:
1.Open the refrigerator door.
2.Grasp the grille with both hands.
3.Push down on the top edge of the grille to release the top clips.
4.Roll grille toward you to release top clips.
5.Pull grille away from the refrigerator.
NOTE: Do not remove the Tech Sheet fastened behind the grille.
To replace the base grille:
1.Line up the edges of the grille with the outside edges of the cabinet.
2.Roll the grille toward you.
3.Place the lower clips in the openings in the metal panel.
4.Roll the grille toward the cabinet until the top clips snap into place.
5.Close the refrigerator door.
See cleaning instructions for defrost pan and condenser coils on page 16.
Changing the light bulbs
Electrical Shock Hazard
Before removing a light bulb or removing a light shield for cleaning, either unplug the refrigerator or disconnect the electric- ity leading to it at the main power supply.
Failure to do so could result in electrical shock.
To change refrigerator light:
1.Disconnect refrigerator from power supply.
2.Reach behind Control Panel to remove bulb.
3.Replace with a
4.Reconnect refrigerator to power supply.
NOTE: Not all appliance bulbs will fit your refrigerator. Be sure to replace a bulb with one of the same size and shape.
Condenser | Defrost |
coils | pan . . |
C;ips
13
