Removing the crispers
For your convenience, one crisper is slightly larger than the other. This allows you to store celery and other longer items in your crisper.
To remove the crispers:
1.Slide crisper straight out to the stop.
2.Lift the front.
3.Slide out the rest of the way.
4.Replace in reverse order.
To remove the cover:
1.Push up the cover insert from the bottom, then slide out with both hands.
2.Lift front of cover frame.
3.Lift cover frame up and out.
To replace the cover:
1.Fit back of cover frame into notch sup- ports on back wall of refrigerator, then lower the front into place.
2.Slide back of cover insert into place, then lower the front.
and crisper cover
Pull out to the stop, lift the front and pull again.
\
Remove the cover insert. Lift the cover front, then the back.
NOTE: If cover insert is glass, handle it with care. It could be heavy.
Adjusting the crisper cover track
Because your crispers are not the same size, your crisper cover has an adjustable center track so you can switch positions of the crispers. You can adjust the center track with the cover in the refrigerator by removing the crispers and the cover insert.
To remove the center track:
1.Push up the cover insert from the bottom, then slide out with both hands.
2.Gently pull up on front end of track.
3.Pull rear end of track out of opening in cover.
To replace the center track:
1.Insert rear end of track (with hole) into opening in cover.
2.Lower front end of track into slot.
3.Make sure rear end of track has snapped into place on under side of cover.
