How To Attach The Grip Belt

1Remove the pad and separate the two straps.

2 Thread one end of the strap through the eyelet, then pass the other end through the loop.

3 Repeat the same procedure to attach the strap to the other eyelet.

4 Connect the strap and and thread the strap

through the buckle, then adjust the grip ( pg. 12).

5 Attach the pad.

1

2

3

4

5

EN7

How To Attach The Strap

1Thread one end of the strap through the eyelet, then pass the other end through the loop.

2Attach the screw to the tripod mounting socket. To tighten the screw firmly, use a coin, etc.

3Adjust the length with the adjuster.

NOTES:

You can use the strap as a shoulder strap by adjusting the length with the adjuster.

Because the screw may cause damage to the camcorder, make sure to attach the screw to the tripod mounting socket when carrying the camcorder.

Use the strap only with this camcorder.

Do not grip the camcorder too firmly when the screw is attached. Doing so may cause damage to the tripod mounting socket.

1

2 3

Page 7
Image 7
JVC GR-DVP3 specifications How To Attach The Grip Belt, How To Attach The Strap, Remove the pad and separate the two straps