JVC GR-DVP3 specifications For Recording, Second Recording, EN47

Press + or – to select “5S”, and press SET/SELECT. The Sub Menu appears.

Press + or – to select “5S”, and press SET/SELECT. Selection is complete. Press + or – to select “ RE- TURN”, and press SET/SELECT twice to close the Menu Screen.

•“5S” appears.

FOR RECORDING

VIDEO/MEMORY

Switch

Recording Start/

Stop Button

Power Switch

	Lock Button
	MENU Button
SET/SELECT	+, – Button
Button

SNAPSHOT Button

Display

MANUAL Menu

5S– OF F

5S AN I M .

EN47

5-Second Recording

Record a vacation or an important event in 5-second clips to keep the action moving. This function is available only for video recording.

1 Set the VIDEO/MEMORY Switch to “VIDEO”, then set the Power Switch to “ ” while pressing down the Lock Button located on the switch. Pull out the viewfinder fully or open the LCD monitor fully.

2 Press MENU. The Menu Screen appears.

3 Press + or – to select “ MANUAL”, and press SET/ SELECT. The MANUAL Menu appears.

4

5

6 Press the Recording Start/Stop Button. The tally lamp lights and beep sounds to indicate the start of recording, and after 5 seconds the camcorder enters Record-Standby mode.

•Even if you press the Recording Start/Stop Button again within 5 seconds after recording starts, Record-Standby mode is not engaged.

7 To exit the 5S mode, select “OFF” in step 5.

To Take A Snapshot In The 5-Second Recording Mode . . .

.... instead of pressing the Recording Start/Stop Button in

step 6, select the desired Snapshot mode in the Menu Screen, then press SNAPSHOT. The camcorder records a 5-second still (
pg. 52). When “5S” is set to “ANIM.” (
pg. 41) this function is not available.

NOTE:

When “5S” is set to “ANIM.” in the Menu Screen the

5-second recording mode is not available. Animation recording of a few frames only is taken instead (
pg. 41).