JVC GR-DVP3 52 EN, Snapshot For Video Recording, FOR RECORDING cont, Snapshot Mode Selection

52 EN

	MENU Button
SET/SELECT	+, – Button
Button
	VIDEO/MEMORY
	Switch

Power Switch

SNAPSHOT Button

Lock Button

Display

CAMERA Menu

SNAP MODE – P I N–UP

FRAME

FUL L

MUL T I – 4

MUL T I – 9

NOTES:

●To remove the shutter sound,
“BEEP” on pg. 40, 42.

●Even if “MULTI-4” or “MULTI-9” is engaged, Snapshot recording will be performed in the FULL mode during Digital Zoom or Night- Alive (
pg. 48).

●If Snapshot recording is not possible, “ ” blinks when SNAPSHOT is pressed.

●If Program AE with special effects (
pg. 48) is engaged, certain modes of Program AE with special effects are disabled during Snapshot recording. In such a case, the icon blinks.

●If SNAPSHOT is pressed when “DIS” is set to “ON” (
pg. 41), the Stabiliser will be disabled.

●During playback as well, all snapshot modes

are available when “ COPY” is set to “OFF” in the Menu Screen (
pg. 44). However, the shutter sound is not heard.

●When a cable is connected to the AV connector, the shutter sound is not heard from the speaker, however it is recorded onto the tape.

FOR RECORDING (cont.)

Snapshot (For Video Recording)

This feature lets you record still images that look like photographs onto a tape.

SNAPSHOT MODE SELECTION

1 Set the VIDEO/MEMORY Switch to “VIDEO”, then set the Power Switch to “ ” while pressing down the Lock Button located on the switch. Open the LCD monitor fully or pull out the viewfinder fully.

2 Press MENU. The Menu Screen appears.

3 Press + or – to select “ CAMERA”, then press SET/ SELECT. The CAMERA Menu appears.

4 Press + or – to select “SNAP MODE”, then press

SET/SELECT.

5 Press + or – to select the desired Snapshot mode, then press SET/SELECT. Press + or – to select

“RETURN” and press SET/SELECT twice. The Menu Screen closes.

•The available Snapshot modes are as the same as those on page 29.

SNAPSHOT RECORDING

1 Press SNAPSHOT. appears while the snapshot is being taken.

If you press during Record-Standby . . .

.... “PHOTO” appears and a still image will be

recorded for approx. 6 seconds, then the camcorder re-enters the Record-Standby mode.

If you press during Recording . . .

.... “PHOTO” appears and a still image will be

recorded for approx. 6 seconds, then the normal recording resumes.

•Regardless of the Power Switch position (“ ” or “ ”), Snapshot recording takes place using the selected Snapshot mode.

Motor Drive Mode

Keeping SNAPSHOT pressed provides an effect similar to serial photography. (Interval between still images: approx. 1 second)

●The Motor Drive mode is disabled when “REC SELECT”

is set to “ / ” in the Menu Screen (
pg. 43).