1
Notches
2
BATT. RELEASE Switch
ATTENTION:
Before detaching the power source, make sure that the camcorder’s power is turned off. Failure to do so can result in a camcorder malfunction.
INFORMATION:
The
Read the kit's instruction manual before using. Neither
To AC outlet
Power cord
AC Power
Adapter/Charger
To DC OUT 
terminal
DC cord
To battery pack mount
EN11
USING THE BATTERY PACK
1 Insert the terminal end 1 of the battery pack into the battery pack mount, then firmly push the end 2 of the battery pack in the direction of the arrow until it locks into place as shown in the illustration.
•To attach the battery firmly, align its two notches with the tabs on the camcorder.
To Detach The Battery Pack. . .
.... while sliding down BATT. RELEASE, detach it.
Approximate recording time
Battery pack | LCD monitor on/ | LCD monitor off/ | |
| Viewfinder off | Viewfinder on | |
|
|
| |
1 hr. | 1 hr. 10min. | ||
|
|
| |
2 hr. | 2 hr. 20 min. | ||
(optional) | |||
|
| ||
|
|
| |
5 hr. 10 min. | 6 hr. 20 min. | ||
(optional) | |||
|
| ||
|
|
| |
7 hr. 40 min. | 9 hr. 20 min. | ||
(optional) | |||
|
| ||
|
|
|
NOTES:
●Recording time is reduced significantly under the following conditions:
•Zoom or
•The LCD monitor is used repeatedly.
•The playback mode is engaged repeatedly.
●Before extended use, it is recommended that you prepare enough battery packs to cover 3 times the planned shooting time.
USING AC POWER
Use the AC Power Adapter/Charger (connect as shown in the illustration).
NOTES:
●The provided AC Power Adapter/Charger features automatic voltage selection in the AC range from 110 V to 240 V.
●For other notes, pg. 77.
