72 EN | USING THE REMOTE CONTROL UNIT (cont.) |
|
| I N | OUT | MODE | Random Assemble | |
1 |
| 00 : 2 5 | ~ 02 : 05 |
| – – | Editing Menu |
2 |
| 07 : 18 ~ 08 : 31 – – – – |
| |||
3 – – 0 3 : 33 ~ 05 : 53 |
|
|
| |||
4 |
| 09 : 30 ~ 13 : 15 |
|
|
| |
|
|
|
| |||
5 |
| 15 : 55 | ~ 16 : 29 – – – – |
| ||
6 – – | – | ~ |
|
|
| |
7~
8~
T I ME CODE | 1 6 | : 3 0 |
TOTAL | 9 | : 39 |
Remote Sensor
START/STOP
PAUSE
R.A.EDIT
ON/OFF
VCR REC
STBY
AUTOMATIC EDITING TO VCR
11 Rewind the tape in the camcorder to the beginning of
the scene you want to edit and press PAUSE (6).
12 Point the remote control towards the VCR’s remote sensor and press VCR REC STBY (q6), or manually engage the VCR’s
13 Press START/STOP on the remote control. Editing proceeds as programmed, right through to the end of the last registered scene.
•When dubbing is complete, the camcorder enters the Pause mode, and the VCR enters its Record- Pause mode.
•If you do not register an
•If you operate the camcorder during automatic editing, the VCR will enter its
14 EngageVCR. the Stop modes for the camcorder and the To make the R.A.Edit counter display disappear, press R.A.EDIT ON/OFF on the remote control.
NOTES:
●Pressing R.A.EDIT ON/OFF on the remote control clears all settings registered during Random Assemble Editing.
●When the editing cable is connected to the remote control’s PAUSE IN connector during dubbing, make sure the remote control is pointed at the VCR’s sensor, and the path between the two is unobstructed.
●Random Assemble Editing may not function properly when using a tape including several duplicated time codes ( pg. 22).
