16 EN
Card Cover
Clipped edge |
Memory card |
Label |
To Protect Valuable Files (available only for SD Memory Card) . . .
Erase protection tab
... slide the erase protection tab on the side
of the memory card in the direction of
“LOCK”. This prevents the memory card from being recorded over. To record on this memory card, slide the tab back to the position opposite to “LOCK” before loading it.
GETTING STARTED (cont.)
Loading A Memory Card
The provided memory card is already inserted in the camcorder when you receive the camcorder.
1 Make sure the camcorder’s power is off.
2 Open the card cover (MEMORY CARD).
3 Insert the memory card firmly clipped edge first.
•Do not touch the terminal on the reverse side of the label.
4 Close the card cover.
To Unload A Memory Card . . .
.... in step 3 push the memory card, then the memory
card comes out of the camcorder automatically. Pull it out and close the card cover.
NOTES:
●Be sure to use only SD Memory Cards marked “
”
or MultiMediaCards marked “
”.
●Some brands of memory cards are not compatible with this camcorder. Before purchasing a memory card, consult its manufacturer or dealer.
●Before using a new memory card, it is necessary to FORMAT the card. pg. 38
ATTENTION:
Do not insert/remove the memory card while the camcorder is turned on, as this may cause the memory card to be corrupted or cause the camcorder to become unable to recognize whether or not the card is installed.
