JVC GR-DVP3 Video/Memory, Switch is set to Memory  pg, Card, For image is selected E01 E06

92 EN		INDEX Indications (cont.)
	Indications	Function
	INSERT ERROR!	● Appears if Insert Editing is attempted on a tape recorded in the LP
	<CANNOT EDIT	mode.	( pg. 68)
	ON A LP RECORDED	● Appears if INSERT (w) on the remote control is pressed when the erase
	TAPE>
	<CHECK TAPE’S ERASE	protection tab is set to “SAVE”.	( pg. 68)
	PROTECTION TAB>
		● Appears if dubbing of copyguarded signals is attempted while this
		camcorder is being used as a recorder.
		● Appears in the following cases when dubbing from a tape to a memory
	COPYING FAILED	card (as digital stills or video clips):
		– when no memory card is loaded.
		– when the memory card's memory is full.
		– when the memory card is not formatted.
		– when a copy-protected SD Memory Card is loaded. ( pg. 60, 61)
		Appears if a memory card is not loaded when SNAPSHOT is pressed
	MEMORY CARD!	while the Power Switch is set to “ ” or “	” and the VIDEO/MEMORY
		Switch is set to “MEMORY”.	( pg. 28)
	PLEASE	Appears when there is a problem with a memory card and its memory is
		corrupt, or it has not been initialized. Initialize the memory card.
	FORMAT
			( pg. 38)
		● Appears when the Power Switch is set to “	” and the VIDEO/MEMORY
		Switch is set to “MEMORY” if there are no image files stored in the memory
	NO FILES STORED	card.
		● Appears if there are no video clip files stored in the memory card when
		the video clip mode is engaged by pressing the SET/SELECT button.
		● Appears after a memory card is initialized.
		Appears if there are no sound files stored in the memory card when the
	NO SOUND FILES	sound effect mode is engaged by pressing the SET/SELECT button or
		D.SOUND is pressed during video recording.
	Unsupported file!	Appears when a file in a format other than MP3 for digital sound or DCF
		for image is selected.
	E01 — E06	The error indications (E01 — E06) show what type of malfunction has
		occured. When an error indication appears, the camcorder turns off
	UNIT IN SAFEGUARD
	MODE REMOVE AND	automatically. Remove the power supply (battery, etc.) and wait a few
	REATTACH BATTERY	minutes for the indication to clear. When it does, you can resume using
		the camcorder. If the indication remains, consult your nearest JVC dealer.
		Appears when the camcorder takes more than 60 seconds to recognize
	CARD ERROR!	the loaded memory card. Remove the memory card once and insert it
		again. Repeat these procedures until no indication appears. If the
		indication still appears, the memory card is corrupted.
	CHECK CARD'S WRITE	Appears when you attempt to shoot digital still images while a copy-
	PROTECTION SWITCH	protected SD Memory Card is loaded.