VIDEO PLAYBACK
VOL. +/–
VIDEO/MEMORY
Switch
Play/Pause
Button (4/6)
Power Switch
| Lock Button | |
Speaker |
| |
Stop Button (5) | SHUTTLE SEARCH | |
Ring (2/3) | ||
|
EN23
Normal Playback
1Load a tape ( pg. 14).
2Set the VIDEO/MEMORY Switch to “VIDEO”, then
set the Power Switch to “ 
” while pressing down the Lock Button located on the switch. To start playback, press 4/6.
•To stop playback, press 5.
•Turn the SHUTTLE SEARCH Ring to the left (2) to rewind, or to the right (3) to
To Control The Speaker Volume . . .
.... press VOL. + to turn up the volume, or – to turn
down the volume.
NOTES:
●If Stop mode continues for 5 minutes when power is supplied from a battery, the camcorder shuts off automatically. To turn
on again, set the Power Switch to “OFF”, then to “ 
”.
●The playback picture can be viewed in the LCD monitor, viewfinder or on a connected TV ( pg. 24, 25).
●You can also view the playback picture on the LCD monitor with it flipped over and pushed against the camera body.
●LCD monitor/viewfinder indications:
•When power is supplied from a battery: the “ 
” battery pack remaining power indicator is displayed.
When power is supplied from an AC outlet: “ 
” does not appear.
•During Stop mode, none of the indications are displayed.
●When a cable is connected to the AV connector, the sound is not heard from the speaker.
Still Playback: Pauses during playback.
1)Press 4/6during playback.
2)To resume normal playback, press 4/6again.
●If still playback continues for more than about 3 minutes, the camcorder’s Stop mode is automatically engaged. After 5 minutes in the Stop mode, the camcorder’s power is automatically turned off.
●When 4/6is pressed, the image may not pause immediately while the camcorder stabilises the still image.
Shuttle Search: Allows
1)During playback, turn the SHUTTLE SEARCH Ring to the right (3) for forward or to the left (2) for reverse search.
2)To resume normal playback, press 4/6.
●During playback, turn the SHUTTLE SEARCH Ring to the right (3) or to the left (2) and hold it. The search continues as long as you hold the ring. Once you release it, normal playback resumes.
●A slight mosaic effect appears on screen during Shuttle Search. This is not a malfunction.
Available only with the remote control (provided) ( pg. 64, 65).
