Whirlpool 9.76E+13 If range does not operate, If you need assistance, If you need service

Models: 9.76E+13

1 12
Download 12 pages 3.35 Kb
Page 10
Image 10
If range does not operate:

If range does not operate:

Check that the circuit breaker is not tripped or the house fuse blown.

Check that the power supply cord is plugged into the outlet.

See Use and Care Guide for troubleshooting list.

If you need assistance:

If you have questions about operating, cleaning or maintaining your range:

Refer to Use and Care Guide.

Call the Customer Interaction Center. Check your Use and Care Guide for a toll-free number to call or call the dealer from whom you purchased this appliance. The dealer is listed in the Yellow Pages of your phone directory under “Appliances — Household — Major — Service and Repair.”

If you need service:

Maintain the quality built into your range by calling an authorized service company.

To obtain the name and number of the authorized service company:

Contact the dealer from whom you purchased your range; or

Look in the Yellow Pages of your telephone directory under “Appliances — Household — Major

— Service and Repair;” or

Call the Customer Interaction Center. The toll-free number is listed in your Use and Care Guide.

When you call, you will need:

The range model number.

The range serial number.

Both numbers are listed on the model/serial rating plate located on the oven frame behind the storage drawer panel.

Moving the range

If you need assistance: WARNING

Tip Over Hazard

A child or adult can tip the range and be killed.

Connect anti-tip bracket to rear range foot.

Reconnect the anti-tip bracket, if the range is moved.

Failure to follow these instructions can result in death or serious burns to children and adults.

When moving range, slide range onto cardboard or hardboard to prevent damaging the floor covering.

If removing the range is necessary for cleaning or maintenance:

1.Unplug range or disconnect power.

2.Slide range forward to complete cleaning or maintenance.

3.Make sure the anti-tip bracket is installed:

Look for the anti-tip bracket securely attached to floor.

Slide range back so rear range foot is under anti-tip bracket.

anti-tip If you need service: bracket

range foot

4.Check that range is level.

5.Plug in range or reconnect power.

10

Page 10
Image 10
Whirlpool 9.76E+13 If range does not operate, If you need assistance, If you need service, Moving the range