Now start...
WARNING
Excessive Weight Hazard
Use two or more people to move and install range.
Failure to do so can result in back or other injury.
1.Remove shipping materials, tape and protective film from range. Keep cardboard bottom and shipping base under range. Remove oven racks and parts package from inside oven.
2.
Take four cardboard corners from the carton. Stack one cardboard corner on top of another. Repeat with other two corners. Place them lengthwise on the floor behind the range — to support the range when it is laid on its back.
3.Firmly grasp the range and gently lay it on its back on the cardboard corners.
4.Pull cardboard shipping base firmly to remove.
5.Use an adjustable wrench to loosen the leveling legs four complete turns.
6.Place cardboard or
hardboard in front
of range. Stand range
back up onto cardboard or hardboard.
WARNING
Tip Over Hazard
A child or adult can tip the range and be killed.
Connect
Reconnect the
Failure to follow these instructions can result in death or serious burns to children and adults.
Contact a qualified floor covering installer for the best procedure for drilling mounting holes through your type floor covering.
7.Use the
Depending on the thickness of your flooring, longer screws may be necessary to anchor the bracket to the
screws are available from your local hardware store.
Check that range is on cardboard shipping base to protect floor covering.
Electrical connection
8.Remove the terminal block cover located on the back of range.
terminal block cover
9.Depending on your electrical supply, make the
| knockout |
knockout | opening |
opening for | for power |
40 amp | supply |
power | cable |
supply cord |
|
5