Whirlpool 9400 warranty Using cycle pause, Lights

2.Select a new cycle and option(s), if desired.

3.Press the DELAY pad again to select a

2 hour delay. The 2 HOURS signal light will come on. Pressing the DELAY pad repeatedly will select (in order) 4 hours,

6 hours, no delay, then 2 hours, etc. If no delay is selected, all delay signal lights will be off.

4.After 2 hours, the signal light will turn off and the dishwasher will start. If 4 hours or 6 hours were chosen, the signal light for the next shorter delay time will turn on and continue to count down. This contin- ues until the delay time ends and the dishwasher starts.

NOTE:

l

l

l

You may press the START pad at any time during the delay if you want the dish- washer to start immediately.

You may press the CANCEUDRAIN pad to cancel the delay and clear the delay signal light.

You may add items to the load at any time during the delay. Close the door firmly to latch it.

Using cycle pause

You can stop a cycle at any time for up to 10 minutes.

1. Press the	DELAY pad. Any		signal	lights	PRESS
that are on will flash slowly until the cycle
restarts after		10 minutes.
2. The cycle	can	be restarted	sooner	by	PRESS
pressing	the START pad.

7