INSTALLATION INSTRUCTIONS
for Your Air Conditioner
Unpack the mounting parts that came with your air conditioner to determine which window installation instruction you should follow.
If you have these parts, follow:
INSTRUCTION 1 (below).
If you have these parts,
follow:
INSTRUCTION
(on page 8):
Installation
Instructions
CAUTION:
lBe sure air conditioner does not fall out of window during installation.
l Handle the air conditioner with care, Watch out for the sharp metal fins on the front and rear coils.
lDo not use the collected water for drinking purposes. It is not sanitary.
,
1l Unpack mounting parts before installing your air conditioner. Make sure you have all the necessary parts (see Figure 3). A normal installation can be made with a screwdriver, saw, small level, pocket knife, tape measure, drill and %“, 9&” and 3/16” drill bits.
1 | Shelf | (1) |
|
|
| 6A | screw | - | 10 x | 1% | in. (2) |
| Support | Bracket | (1) | 7 | Screw | - | 9 x | (51 | |||
i | Sill Bracket | (1) |
|
|
| Side Seal | Strip | (1) | |||
4 | bolt | (2) |
|
| ii | Lower | Track | Seal | (1) | ||
4A | nut | (2) |
|
| 10 | Locking |
| Bracket | (1) | ||
48 | flat | washer | (2) | 11 | Foam | Seal Strip | (1) | ||||
4C | lockwasher |
| (2) | 12 | Panel | Frame | (1) |
| |||
5 | Translucent | Panel |
| (1) | 13 | Thread | Cutting | Screw | |||
6 | Screw | - 10 | x |
| (21 |
| #6/32 | x | (41 |
Description of Parts
If using Item 13 for fastening Item10 or 12 to metal or plastic, use