7l Install shelf
8l Measure height of opening (see Figure 9). Subtract
Figure 9
c
9l Measure out the distance from Figure 9 and mark it along the
10l Lift vertically and remove panel frame from unit. Slide translucent panel into groove in frame, keeping honeycomb side to the face side of frame (see Figure 11). Slide frame back into place on unit. Panel should enter the top angle groove.
Figure 11
PLAIN SIDE -
11l Peel backing from seal strip (Item 8) and press it onto side filler frame guides on each side of unit (see Figure 12).
Figure
CUT OFF EXCESS
LENGTH BELOW UNIT.
12. Place unit in window by resting unit on shelf. Push unit towards window so side angles are sealing against the side jamb stop (see Figure 13). Slide the opened window sash firmly to side of unit. Push unit and filler frame to make certain the frame and unit sealing strips are sealing
Figure 13
SEAL
STRIP
c
SEAL STRIP
HONEYCOMB SIDE