RECOMMENDED GROUNDING METHOD

For your personal safety, this appliance must be grounded. This appliance is equipped with a power supply cord having a 3-prong grounding plug. To minimize possible shock hazard, the cord must be plugged into a mating 3-prong grounding type wall receptacle, grounded in accordance with the National Electrical Code and local codes and ordinances. If a mating wall receptacle is not available, it is the personal responsibility and obligation of the customer to have a properly grounded 3-prong wall receptacle installed by a qualified electrician.

ELECTRICAL

REQUIREMENTS

Chart-D

PLUG AND

SERIAL PLATE

RECEPTACLE

OF BRANCH

For 230 volt and 230/208 volt models with serial plate amperes up through 24.0

Refer to Chart D for specific wiring and recep- tacle information to be used.

OBSERVE ALL LOCAL GOVERNING CODES AND ORDINANCES.

Do not, under any circumstances, remove the power supply cord ground plug.

ELECTRICAL GROUND IS REQUIRED ON THIS APPLIANCE.

A three-wire, single-phase 60 hertz AC only electrical supply is required.

A separate electrical supply is required on a separately fused circuit. Do not fuse ground- neutral.

See Chart D for receptacle voltage require- men ts, proper fuse size, wire and wiring connections which must conform with rating of the appliance. Do not use an extension cord.

RECEPTACLE WIRING

RECEPTACLE WIRING should be at least as large as size shown on electrical Chart D. Use copper wire only. It is the personal responsibility and obligation of the customer to provide proper and adequate receptacle wiring installed by a

qualified electrician. OBSERVE NATIONAL

ELECTRICAL CODE AND ALL LOCAL

GOVERNING CODES AND ORDINANCES.

RECOMMENDED GROUNDING METHOD

For your personal safety, this appliance must be grounded. This appliance is equipped with a power supply cord having a 3-prong grounding plug. To minimize possible shock hazard, the cord must be plugged into a mating 3-prong grounding type wall receptacle, grounded in accordance with the National Electrical Code and local codes and ordinances. If a mating wall receptacle is not available, it is the personal responsibility and obligation of the customer to have a properly grounded 3-prong wall receptacle installed by a qualified electrician.

Page 5 Page 7
Page 6
Image 6
Whirlpool ACE184XM0 manual Electrical Requirements
Page 5 Page 7

ACE184XM0 specifications

The Whirlpool ACE184XM0 is a remarkable air conditioning unit that combines efficiency with innovative technology to provide optimal comfort for residential spaces. Designed for versatility, it serves both cooling and heating purposes, making it suitable for various climates and seasonal changes.

One of the standout features of the ACE184XM0 is its powerful cooling capacity. With a cooling capacity of 1.5 tons, it is well-equipped to cool rooms up to 150 square feet efficiently. This makes it an ideal choice for living rooms, bedrooms, or office spaces, ensuring that users can enjoy a comfortable indoor environment even during the hottest summer days.

In addition to cooling, the ACE184XM0 includes a heating mode, allowing it to function as an effective heater during the colder months. This dual functionality not only enhances year-round usability but also reduces the need for additional heating devices, making it a cost-effective solution for climate control.

The unit features advanced inverter technology that ensures energy-efficient operation. This technology adjusts the compressor's speed based on the cooling or heating demand, which results in lower energy consumption compared to traditional air conditioning units. The inverter functionality translates to quieter operation and reduced electricity bills, making the ACE184XM0 an environmentally friendly option.

Another key characteristic of the ACE184XM0 is its user-friendly interface. Equipped with a remote control, users can easily adjust settings without having to leave their comfort zones. The easy-to-read display on the unit also lets users monitor temperature settings, fan speed, and operational modes at a glance, enhancing the overall user experience.

Furthermore, the Whirlpool ACE184XM0 incorporates an anti-dust filter that helps to purify the air, removing dust particles and allergens from the indoor environment. This feature is especially beneficial for those with allergies, as it promotes cleaner air quality.

In summary, the Whirlpool ACE184XM0 is a versatile and efficient air conditioning unit that pairs powerful performance with innovative features. Its dual cooling and heating modes, inverter technology, user-friendly controls, and air purification capabilities make it a top choice for those seeking comfort and efficiency in their homes.
Top Page Image Contents