AIR CONDITIONER USE

Operating your air conditioner properly helps you to obtain the best possible results.

This section explains proper air conditioner operation.

IMPORTANT:

If you turn off the air conditioner, wait at least 3 minutes before turning it back on. This prevents the air conditioner from blowing a fuse or tripping a circuit breaker.

Do not try to operate your air conditioner in the cooling mode when outside temperature is below 66°F (19°C). The inside evaporator coil will freeze up, and the air conditioner will not operate properly.

NOTES:

In the event of a power failure, your air conditioner will automatically turn back on.

If the electronic control will not respond to touch pad or remote control commands, it is necessary to unplug the air conditioner from the electrical outlet for 5 seconds before plugging back in.

StartingYourAirConditioner

NOTE: If the room temperature is below 55ºF (13ºC), the display will show 55ºF (13ºC). If the room temperature is above 99ºF (37ºC), the display will show 99ºF (37ºC).

Display Symbols

1.

Remove clear protective film from control panel and front

 

panel badge.

2.

Set air exchanger. See “Air Exchanger.”

3.

Press POWER to turn on air conditioner.

 

NOTE: When air conditioner is turned on for the first time

 

after it is plugged in, it will display the default settings: Cool

A B

E F

A. Cool mode indicator light

B. Fan only mode indicator light C. Power Saver indicator light D. Timer indicator light

C D

GH

E.Auto fan mode indicator light

F.Low fan mode indicator light

G.High fan mode indicator light

H.Turbo fan mode indicator light

 

mode, Turbo fan speed, 72°F (22°C) for 3 seconds. When it is

 

turned on at all other times, it will display the previous

 

settings for 3 seconds, and then display the room

 

temperature.

4.

Choose mode. See “Mode.”

5.

Choose fan speed. See “Fan Speed.”

6.

Choose temperature. See “Temperature.”

Air Exchanger

Set the Air Exchanger control to CLOSED for maximum continuous cooling. The Air Exchanger set to OPEN circulates fresh air and draws stale or smoky air from the room.

Open—to exhaust room air to the outside

Closed—maximum air circulation and cooling

Mode

1.Press MODE until you see the indicator light come on for the setting you desire.

2.Choose Cool, Fan Only or Power Saver.

Cool—Cools room. Press FAN SPEED to choose fan speed. Then adjust the temperature by pressing the plus or minus buttons.

Fan Only—Only the fan runs. You can select the fan speed by pressing FAN SPEED, but you cannot adjust the Temperature control setting. Display shows the current room temperature.

Power Saver—Fan runs only when cooling is needed. You can select the fan speed by pressing FAN SPEED.

Because the fan does not circulate the room air continuously, less energy is used, but the room air is not circulated as often. Use Power Saver when you are asleep or away from home.

9

Page 9
Image 9
Whirlpool ACS088PR0 manual AIR Conditioner USE, StartingYourAirConditioner, Display Symbols, Air Exchanger, Mode

ACS088PR0 specifications

The Whirlpool ACS088PR0 is an advanced air conditioning unit designed to provide efficient cooling solutions for residential and commercial spaces. With a focus on performance and comfort, this model incorporates several key features and technologies that make it a standout choice in the marketplace.

One of the main features of the ACS088PR0 is its powerful cooling capacity, which is ideal for spaces of varying sizes. This unit is capable of quickly lowering indoor temperatures even during the hottest days, ensuring optimal comfort for users. Additionally, it employs a variable-speed compressor that not only enhances cooling efficiency but also helps in reducing energy consumption. As a result, this air conditioner is designed to deliver significant savings on electricity bills while maintaining a comfortable living environment.

The ACS088PR0 also integrates advanced smart technology, allowing users to control the unit remotely via a smartphone app. This feature provides convenience, enabling users to adjust settings, monitor energy usage, and receive maintenance reminders from anywhere. The smart connectivity enhances user experience and ensures that the air conditioner can be optimized according to individual preferences and schedules.

Another notable characteristic of the Whirlpool ACS088PR0 is its quiet operation. The unit is designed to minimize noise levels, making it suitable for bedrooms, offices, and other quiet environments. The sound-dampening design, along with high-quality components, ensures that users can enjoy comfortable cooling without disruptive noise.

The air conditioner also features a multi-stage air filtration system that helps in improving indoor air quality. The integrated filters effectively capture dust, allergens, and other airborne particles, leading to a healthier living space. The filters are easily accessible, making routine maintenance simple for users who prioritize cleanliness and air quality.

In terms of durability, the ACS088PR0 is built with high-quality materials that ensure long-lasting performance. Its rugged construction and efficient design make it suitable for various climates and conditions.

With a combination of advanced features, smart technology, and robust design, the Whirlpool ACS088PR0 stands out as an excellent choice for those seeking a reliable and efficient air conditioning solution. Whether for residential or commercial use, this unit delivers on performance, comfort, and energy efficiency.