Install air conditioner in window
1.Slide air conditioner onto support platform. Check to be sure air conditioner side channel fits securely against vertical edge of window frame.
NOTE: If air conditioner side channel does not fit securely against window frame, remove air conditioner and readjust leveling bolt.
2.Drill two ¹⁄₈" holes through the window channel frame in alignment with existing holes in bottom bar. Install two ³⁄₈"
NOTE: If window channel frame is not tall enough to use existing holes, drill two new holes off to the side of the existing holes to attach the air conditioner bottom bar to the support platform. Air conditioner should be firmly anchored to window channel frame or support platform.
A |
B
C
D
A. Window channel frame | C. Bottom bracket |
B. ³⁄₈" | D. ¹⁄₈" drilled holes |
|
|
CompleteInstallation
1.Place top retainer on top edge of filler panel, then place the bottom edge of filler panel into groove of bottom retainer (mounted on air conditioner). Filler panel may be trimmed with knife or scissors to fit window height. Slide sliders upward making sure filler panel aligns in sliders.
A
B
C
D
E
F
2.With sliders up against top retainer, drill ¹⁄₈" hole through window frame in alignment with existing hole in slider. Install ³⁄₈"
B
A
A. ¹⁄₈" drilled hole
B.³⁄₈"
3.Check all seals and plug all air leaks around air conditioner. Use sealant to fill any minor openings.
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or electrical shock.
4.Plug into a grounded 3 prong outlet.
5.Press RESET on the power supply cord plug.
A. Top retainer | D. Slider |
B. Seal under top | E. Seal between side of cabinet and sliding |
retainer | sash (sliding window installation only) |
C. Filler board | F. Side channel |
8
