DEHUMIDIFIER USE
SETTING THE CONTROLS (CONTROL TYPES 1 & 2 ONLY)
Starting/Stopping the Dehumidifier
NOTE: Before turning on the dehumidifier, be sure that the bucket is empty and fits all the way into the dehumidifier.
Control Type 1
NOTE: Minimum operating temperature is 65ºF (18ºC).
AB
A. Light glows, indicating the bucket is full or is not in correct position. B. Adjusts amount of moisture removed from room.
Control Type 2
NOTE: Minimum operating temperature is 55ºF (13ºC).
AB
C
A. Light glows, indicating the bucket is full or is not in correct position. B. Adjusts amount of moisture removed from room.
C. Selects fan speed.
Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or electrical shock.
1.Plug into a grounded 3 prong outlet.
2.To turn on dehumidifier, turn DRYNESS CONTROL clockwise.
IMPORTANT: If the Empty/Adjust Bucket light comes on, the dehumidifier will not operate. Empty or adjust bucket.
3.To turn off dehumidifier, turn DRYNESS CONTROL counterclockwise to OFF.
Empty/Adjust Bucket Light
If this light is on, the dehumidifier is not running. This light indicates that you need to check:
•If the bucket is full, empty and reinstall bucket.
•If the bucket is not in position, remove the bucket and reinstall. Make sure the bucket fits all the way into the dehumidifier and the light is off, or dehumidifier will not run.
Fan Speed (Control Type 2 Models Only)
The Fan Speed controls fan operation
•
•
