3.Pour water through opening into a sink or tub.

3.Attach a garden hose to drain hose connec- tor on the inside of the dehumidifier. Hand tighten.

AB

4.Reinstall bucket.

IMPORTANT: If the Empty/Adjust Bucket light comes on, the dehumidifier will not operate. Empty or adjust bucket.

Option 2—Connect Drain Hose

If you plan to run your dehumidifier continu- ously, you may want to attach a garden hose to the drain hose connector.

1.Use a flat-blade screwdriver to gently pry out the drain hose connector cover. Discard the cover.

A

B

A. Drain hose connector cover

B.Bucket

2.Remove bucket.

A. Garden hose

B. Drain hose connector

4.Place the other end of garden hose into a floor drain. Check to see that the hose lies flat and is in the drain.

5.Reinstall bucket.

NOTES:

To use the bucket without the garden hose, remove the garden hose. Then reinstall bucket.

The bucket must be installed and properly aligned for the dehumidifier to operate with or without a garden hose connected.

NORMAL SOUNDS

When your dehumidifier is operating normally, you may hear sounds such as:

Compressor sounds, which may be loud. This is normal.

Clicking sounds when the dehumidifier or compressor turns off and on, and when the Automatic Shutoff Switch is working.

Air movement from the fan.

2-7

Page 15
Image 15
Whirlpool AD35DSS, AD50DSS, AD70USS, AD50USS, AD25BSS, AD35USS manual Normal Sounds, Option 2-Connect Drain Hose