Thed ishes wereno t
loaded correctly. Seenotes in " Loadingthe Dishwasher Baskets ".
Selecta more intensive programme.
See"Wash Cycle Table ."
Usemore detergent, or change your detergent.
Rearrangethe items so that the sp ay can rotate freely.r
Cleanand/or fit the filter combination correctly.
Cleanthe sp ay arm jets. See "Cleaning theSpray
Arms". r
Useless detergent if you have soft water and select
a shortestcycle to wash the glassware and to get
themclean.
Use a mild abrasive cleane r to eliminate those mark s.
Re-loadingthe dishes properly.
Loadthe dishwasher as suggested in the directions.
Increasethe amount of rinse-aid/refill the rinse-aid
dispenser.
Donot empty your dishwasher immediately after
washing.Open the door slightly so that the steam can
escape.Begin unloading the dishwasher only once t
hedishes are barely warm to the touch. Empty the low
basketfirst. This prevents water form droppingoff
dishesin the upper basket.
Inshort program the washing temperature is lower.
Thisalso lowers cleaning performance. Choose
a programwith a long washing time.
Waterd rainage is more difficult with these items.
Cutlery or dishes of thi s type are not suitable for
washingin the dishwasher.
Theprogrammewas
notpowerfulenough.
Not enough detergent
wasdispensed.
Items are blocking
the pathof sprayarms.
The filter comb ination
inthebaseofwash
cabinet is not c lean or
is notcorre ctlyfitted.
Thismay cause
the sp ay arm jets
to getblocked.
r
Combination of soft
waterand too much
detergent.
Aluminum utensils
haver ubbedagainst
dishes.
Dishesblock
detergentcups.
Improper loadin g
Toolittle rinse-aid
Dishesare removed
too soon
Wrongprogram
has been selec ted
Useof cutlery with
a low-quality c oating
Error CodesTapis not opened, or water intake is restricted,or water pressure
is too low.
Malfunction of te mperature sen sor or of hea ting element.
Too muc h in l et wa te r .
Short circuit or break of tempe rature sensor
Opencircuit or b reak of temperature sensor
Longerinlet time.
Longer heating time,
but not reaching required temperature
Overfilled.
Failureof tem peraturesensor
Failureof tem peraturesensor
When some malfunctions come on, the appliance will display error codes to warn you:
If overflow occurs,turn off the main water supply before calling a service.
If there is water in the base pan becau se of an overfill or small leak,
the water should be removed before restartin g the dishwasher.
24