20
5
4
6
2
RUBBER
SCREW
COVER
7
SCREW
CONEGEAR
5B
5A
【】Figure 7
Dishwasherinstallation steps●
1 Installthe furniture door to the outer door of the dishwasherusing the brackets provided. Refer
tothe template for positioning of the brackets.
2 Adjust the tension of the door springs by usingan Allen key turning in a clockwise motionto
tightenthe left and right door springs. Failureto do this could cause damage to your dishwasher
(Illustration 2).
3 Connectthe inlet hose to the cold watersupply .
4 Connectthe drain hose. Refer to diagram.(Figure6)
5 Connectthe power cord.
6Affix the condensation strip underthe work surface of cabinet. Please ensurethe condensation
stripis flush with edgeof work surface.
7 Placethe dishwasher into position.
8 Levelthe dishwasher.The rear feet can be adjusted from the front of thedishwasher by turning
thescrews on the left and right hand side of the cabinet (Illustration5A). Toadjust the front feet,
usea wrench and turn the front feet until the dishwasheris level (Illustration 5B).
9Thedishwasher must be secured in place.There are two ways to do this:
A.Normal work surface-secure to the work surfaceby using two woodscrews ensuring the
dishwasherweight is not being hit by thes urface(Illustration 6).
B.Marble or granite work top-secure the bracketto the side panel of the dishwasher and secure
thedishwasher to the furniture housing. Putthe rubber cap over the screw (Illustration 7).