19
Tensionadjustment
ofthe door spring
【】Figure5
Tension adjustmentof the door spring●
Connection of drain hoses●
The door springs are set at the fact ory to the proper tension for the o uter door. If aesthetic
woodenpanel are installed, you willhave to adjust the door spring tension. Rotatethe
adjustingscrew to drive the adjustorto strain or relax the steel cable(seefigure 5).
Door spring ten sion is correct when
the doorremains horizontal in the
fullyo penedposition yet rises
toaclosewiththeslightliftofa
finger.
Lj
relax
Insertthe drain hose into a drain pipe witha minimum diameter of 4cm, or let it
runintothesink,makingsuretoavoidbendingorcrimpingit.Usethespe ial
plasticsupport that comes with the appliance(figure 6). The free andof the hose
must be at a height between 400 and 100 0mm and must not be immersed in water
toavoid the back flow of it. ATTENTION:The special plastichose support must be
solidlyfastened to the wall to prevent thedrain hose from moving and allowingwater
tospill outside the drain.
c
Drainpipe connection