Whirlpool BHDH2500FS0 manual 25,30,40, and50 pint models

Using Your Dehumidifier

Contmued

r

PAN FULL HUMIDISTAT

0

I .

PAN FULL HUMIDISTAT

0

r

PAN FULL

0

/

25,30,40, and50 pint models

Control panel

These units have a control panel containing two controls -the Pan Full Light and the Humidistat.

Pan Full Light -This light glows when the water pan is full and needs to be emptied.

Humidistat - This controls the amount of moisture left in the room. When the humidity in the room increases, the unit automatically starts. When the humidity decreases to the selected level, the unit automatically stops. The unit will run constantly when control is set to DRYEST.

Unit operation

1.Turn Humidistat to OFF. Plug power supply cord into electrical outlet. Be sure to use the correct grounding technique. (See page 4.)

Turn the Humidistat toward DRYEST for normal operation.

The Humidistat can be set anywhere between OFF and DRYEST. lf you need more dehumidification, turn the Humidistat toward DRYEST. lf you need less dehumidification, turn the Humidistat toward OFF.

Stop the unit manually by turning Humidistat right to OFF.

NOTE: The dehumidifier will run continuously when the control is set to DRYEST.