JVC GR-DV900, GR-DV700 instruction manual WebCam, Using The Camcorder As a

	EN 63
Using The Camcorder As A	1 Make sure all necessary software (provided) are
	installed in your PC and all units are turned off.
WebCam	2 Connect the camcorder to your PC using the USB
	cable.
This camcorder can be used as a WebCam via USB	3 Set the VIDEO/MEMORY Switch to “MEMORY”.
connection.	4 Set the Power Switch to “A” or “M” while
	pressing down the Lock Button located on the
	switch.
	5 Turn on the PC.
	● “ ” appears on the screen.
	● If the PC is not powered on, the camcorder
	does not enter the Web Camera mode.
	6 When finished, turn off the PC first, then the
	camcorder. Disconnect the USB cable from the
	camcorder and PC.
To USB	NOTES:
	● It is recommended to use the AC Adapter as the
	power supply instead of the battery pack.
	( pg. 11)
	● Use the provided software PIXELA ImageMixer to
USB cable	capture video in real time.
	● You can also use the camcorder for web
(provided)	conference by using Microsoft Windows®
	NetMeeting® and signing up for MSN Hotmail.
	● In the Web Camera mode, the following buttons
	cannot be operated: TITLE, E-MAIL, SNAPSHOT,
	INDEX, NAVI, NAVI STORE, the Recording Start/
	Stop Button.
To USB connector	Refer to the instruction manuals of the PC and
	provided Software.

ADVANCED FEATURES

USB-equipped PC