JVC GR-DV700, GR-DV900 54 EN, Installing The Batteries, Beam Effective Area indoor use

54 EN USING THE REMOTE CONTROL UNIT

The Full-Function Remote Control Unit can operate this camcorder from a distance as well as the basic operations (Playback, Stop, Pause, Fast-Forward and Rewind) of your VCR. It also makes additional playback functions possible. ( pg. 55)

Installing The Batteries

The remote control uses two “AAA (R03)” size batteries. Refer to “General Battery Precautions” ( pg. 70).

1Remove the battery compartment cover while pushing up the tab as illustrated.

2Insert two “AAA (R03)” size batteries in the correct direction.

3Re-attach the battery compartment cover.

AInfrared beam transmitting window Transmits the beam signal.

The following buttons are available only when the camcorder’s Power Switch set to “PLAY”.

B DISPLAY Button	( pg. 22, 50, 59)
C SHIFT Button		( pg. 55, 58)
D SLOW Rewind/Forward Buttons		........ ( pg. 55)
Left/Right Buttons		( pg. 55)
E REW Button
•Rewind/Reverse Shuttle Search
on a tape		( pg. 21)
•Displays previous file
in a memory card		( pg. 24)
F FADE/WIPE Button		( pg. 60)
G EFFECT ON/OFF Button		( pg. 56)
H EFFECT Button		( pg. 56)
I PAUSE IN Connector		( pg. 59)

1

3 Tab 2 +

– +

–

J MBR SET Button	( pg. 58)
K Up Button	( pg. 55)
INSERT Button	( pg. 57)
L Down Button	( pg. 55)
A. DUB Button	( pg. 56)
M PLAY Button
•Starts Playback of a tape	( pg. 20)
•Starts Auto Playback of images
in a memory card	( pg. 24)
N FF Button

Insert the minus (–) end first.

Beam Effective Area (indoor use)

When using the
remote control, be
sure to point it at the
remote sensor. The
transmitted beam’s
approximate effective	Remote sensor
distance for indoor
use is 5 m.

NOTE:

The transmitted beam may not be effective or may cause incorrect operation when the remote sensor is directly exposed to sunlight or powerful lighting.

Buttons And Functions

•Forward/Forward Shuttle Search
on a tape	( pg. 21)
•Displays next file
in a memory card	( pg. 24)
O STOP Button
•Stops the tape	( pg. 20)
•Stops Auto Playback	( pg. 24)
P PAUSE Button

Pauses the tape	( pg. 55)
Q R.A.EDIT Buttons	( pg. 58 – 61)

The following buttons are available when the camcorder’s Power Switch set to “A” or “M”.

aZoom (T/W) Buttons

Zoom in/out ( pg. 18, 55)

(Also available with the Power Switch set to “PLAY”)

bSTART/STOP Button

Functions the same as the Recording Start/Stop Button on the camcorder.

cSNAPSHOT Button

Functions the same as SNAPSHOT on the camcorder.