USER MAINTENANCE

EN 73

After Use

1Turn off the camcorder.

2Slide and hold OPEN/EJECT in the direction of the arrow, then pull the cassette holder cover open until it locks. The cassette holder opens automatically. Remove the cassette.

3Press “PUSH HERE” to close the cassette holder.

Once the cassette holder is closed, it recedes automatically. Wait until it recedes completely before closing the cassette holder cover.

4Slide BATT.RELEASE 1 and remove the battery pack 2 3.

Cleaning The Camcorder

1To clean the exterior, wipe gently with a soft cloth.

Put the cloth in diluted mild soap and wring it well to wipe off heavy dirt. Then wipe again with a dry cloth.

2Press PUSH OPEN and open the LCD monitor. Wipe gently with a soft cloth. Be careful not to damage the monitor. Close the LCD monitor.

3To clean the lens, blow it with a blower brush, then wipe gently with lens cleaning paper.

NOTES:

PUSH HERE

Cassette holder cover

Remove.

Cassette holder

Avoid using strong cleaning agents such as benzine or alcohol.

Cleaning should be done only after the battery pack has been removed or other power units have been disconnected.

Mould may form if the lens is left dirty.

When using a cleaner or chemically treated cloth refer to the cautions of each product.

To clean the viewfinder, please consult your nearest JVC dealer.

OPEN/EJECT Switch

REFERENCES

BATT.RELEASE Switch

Page 73
Image 73
JVC GR-DV900, GR-DV700 After Use, Cleaning The Camcorder, Slide BATT.RELEASE 1 and remove the battery pack 2