JVC GR-DV700, GR-DV900 instruction manual 80 EN

80 EN		INDEX Indications (cont.)
Warning Indications
Indications		Function
	Displays the battery remaining power.
	Remaining power level: high
	Remaining power level: exhausted
	As the battery power comes close to nil, the battery indicator blinks.
	When the battery power is exhausted, power turns off automatically.
	Appears when no tape is loaded.		( pg. 15)
CHECK TAPE’S ERASE	Appears when the erase protection tab is set to “SAVE” while the Power Switch is
PROTECTION TAB	set to “A” or “M” and the VIDEO/MEMORY Switch is set to “VIDEO”.
			( pg. 13)
HEAD CLEANING	Appears if dirt is detected on the heads during recording. Use an optional
	cleaning cassette.
REQUIRED USE
CLEANING CASSETTE
CONDENSATION	Appears if condensation occurs. When this indication is displayed, wait more
	than 1 hour until condensation disappears.
OPERATION PAUSED
PLEASE WAIT
TAPE!	Appears if a tape is not loaded when the Recording Start/Stop Button or
	SNAPSHOT Button is pressed while the Power Switch is set to “A” or “M” and
	the VIDEO/MEMORY Switch is set to “VIDEO”.
TAPE END	Appears when the tape ends during recording or playback.		( pg. 64)
SET DATE/TIME!	● Appears when the date/time is not set.		( pg. 14)
	● Appears when the built-in clock (lithium) battery is discharged and the
	previously set date/time is erased.		( pg. 14)
LENS CAP	Appears for 5 seconds after power is turned on if the lens cap is attached.
A. DUB ERROR!	Appears if Audio Dubbing is attempted on a blank portion of a tape. ( pg. 56)
A. DUB ERROR!	● Appears if Audio Dubbing is attempted on a tape recorded in the LP mode.
<CANNOT DUB ON A			( pg. 56)
LP RECORDED TAPE>	● Appears if Audio Dubbing is attempted on a tape recorded in 16-bit audio.
<CANNOT DUB ON A			( pg. 56)
16bit RECORDING>	● Appears if A. DUB (D) on the remote control is pressed when the erase
<CHECK TAPE’S	protection tab is set to “SAVE”.		( pg. 56)
ERASE PROTECTION
TAB>
INSERT ERROR!	Appears if Insert Editing is attempted on a blank portion of a tape.		( pg. 57)
INSERT ERROR!	● Appears if Insert Editing is attempted on a tape recorded in the LP mode.
<CANNOT EDIT ON A			( pg. 57)
LP RECORDED TAPE>	● Appears if INSERT (I) on the remote control is pressed when the erase
<CHECK TAPE’S	protection tab is set to “SAVE”.		( pg. 57)
ERASE PROTECTION
TAB>