WATER HEATING HOLD SIGNAL LIGHT | DELAY’WASH SIGNAL LIGHT | CYCLE CONiROL KNOB |
CLEAN SIGNAL LIGHT
Selecting a cycle
POTS & PANS Cycle
Maximum cleaning for cooked- or
the dishwasher automatically heats the water to 145 F (63 C] in both washes and the last rinse (marked *). Cycle time will be about 1% to 2
hours, depending on time needed to heat water.
HEAVY WASH Cycle
A double wash for heavily soiled loads. Cycle time is about 75 minutes.
NORMAL WASH Cycle
For normal, everyday soiled loads. (The Energy Guide Label data is based on this cycle.) Cycle time is about 65 minutes.
LOW ENERGY WASH Cycle
For
RINSE & HOLD Cycle
For rinsing a few items to be washed one or more days later. Cycle time is about 15 minutes.
Use AIR DRY only. Do not use
Changing a setting
You can change a setting anytime during any cycle.
1.Press in the door latch to unlatch the door and stop the cycle.
The RESET OPTIONS Button
If you want to change a selected option,
2.Turn the Cycle Control Knob clockwise to the cycle you want.
3.Be sure the detergent dispensers are filled properly for the new cycle.
4.Close and latch the door. The dishwasher will
automatically start the new cycle.
optionpush theifdesired,RESET OPTIONS Button.
0