Adjustment of the Display (Direct)
Press the buttons of the remote control to make direct adjustments and settings. A press of the desired button will show the adjustment display. The adjustment condition is stored in memory even after the power is switched off.
Preparation: Select the input screen (VIDEO, RGB1, RGB2, RGB3) that is to be adjusted, after the input signal is connected.
Adjustment of the Screen
The adjustment of screen size is made easier when a geometric shape such as a square is displayed.
Press the button to show the adjustment display. The display will go off about 3 seconds after your finger is released from the button.
Adjustment of the screen display position
| POSITION / CONTROL | ||||||
Move up |
|
|
|
|
| ||
|
|
|
| ||||
Move left |
|
|
|
|
|
| Move right |
|
|
|
| ||||
|
|
|
|
|
| Move down | |
|
|
|
|
|
| ||
Adjustment display of the up/down position
▼MOVE DOWN | MOVE UP ▲ |
Adjustment display of the left/right position
◀ MOVE LEFT MOVE RIGHT ♣
NOTE: See page 30 on how to adjust the H/V Positions.
Returning the Screen Adjustment to the Factory Default Settings (NORMAL)
The display position (POSITION) will return to the factory default setting. At this time the following settings of the menu control will also simultaneously return to the factory default settings: AUTO PICTURE, PICTURE ADJUST, FINE PICTURE,
1.Press the RASTER NORMAL button The verification sub menu is displayed.
RASTER
NORMAL
WARNING
ABOUT TO PRESET
RASTER
PRESS:
'PROCEED' TO RESET 'EXIT' TO CANCEL
2.A press of the PROCEED button will reset the adjustment.
To cancel the reset, press the EXIT button.
PROCEED
*Use the RASTER NORMAL button. A press of the VISUAL NORMAL button will not return the screen adjustment to the factory default setting.
*A press of the NORMAL button during the
*
To adjust
23
