NEC 42PD2, 50PD1 Source Info Video Mode Ntsc, Information Screen, When video input is selected

Information Screen

This permits a check on-screen of the resolution and data of the signal that is currently being input.

1.Align the cursor with icon (10) on the second page of the main menu and display the display mode.

Information screen

Icon (10)

SOURCE INFO.

RGB1

H-FREQ.31.5kHz

V-FREQ.60.0Hz

H-POL.NEG

V-POL.POS

*When RGB input is selected SOURCE: RGB1, RGB2, RGB3

“NO SIGNAL” is displayed when there is no signal. H-FREQ: Horizontal frequency (kHz)

V-FREQ: Vertical frequency (Hz)

H-POL: Polarity of the horizontal sync signal Neg./Pos. (Negative polarity/Positive polarity)

V-Pol.:Polarity of vertical sync

Neg./Pos. (Negative polarity/Positive polarity)

SOURCE INFO.

VIDEO

MODE : NTSC

*When video input is selected

SOURCE: VIDEO

MODE: NTSC, PAL, SECAM

Note: NTSCis processed as 4.43 NTSC.

2.Return to the main menu

EXIT

*Settings cannot be reset.

*To delete the main menu, press the EXIT button once more.

*The vertical frequency that is displayed in the display mode can have a slight difference with respect to the actual vertical frequency of the connected input signal. Vertical signals of between 60 Hz and 70 Hz have an error of plus/minus 3 Hz. Vertical signals of 70 Hz or greater have an error of plus/minus 5 Hz. The frequency display of the display mode via the OSM system should always be regarded as a guideline.

39