NEC 42PD2, 50PD1 Sharpness, VISUAL NORMAL button, RASTER NORMAL button, Id Select, Clear

11SHARPNESS:

Adjusts the fine screen quality of the video screen.

12VISUAL NORMAL button:

Returns the screen adjustments to the default factory visual settings.

13RASTER NORMAL button:

Returns the screen adjustments to the default factory raster settings.

14ID SELECT:

Selects the ID number of each monitor in a video wall so that each monitor can be adjusted with the remote control one at a time.

15CLEAR:

Deletes the ID number that was set with ID SELECT.

16Remote control transmitter:

Transmits the remote control signal. (Used with the wireless remote control.)

17Remote jack:

Connects the supplied remote control cable when used as a wired remote control.

Battery Installation and Replacement

The remote control is powered by two 1.5V AAA batteries.

1. Press and open the cover.

2.Align the batteries according to the (+) and (-) indications inside the case.

3. Replace the cover.

15