PlasmaSync 50PD1 Model PX-50VP1A | NEC 42PD2, 50PD1, 50PD1, 42PD2

PlasmaSync 50PD1 (Model PX-50VP1A)

	Plasma Screen	50 inch Visual size (Diagonal), AC Drive type
		Aspect ratio : 16:9
		Optical filter coating
		Display color : 16,770,000 colors 256 levels
	RGB Input Terminals	RGB 1	:	mini D-SUB 15pin
		RGB 2	:	BNC (R,G,B, H/CS and V)
		RGB 3	:	Digital RGB (DVI 24+5pin: Not compatible with analog input.
				Complies with DVI
		Video	:	Analog 0.7Vp-p/75 Ohms (Positive)
			:	Sync.	: Separate Sync. TTL level, 0.7 - 4.0Vp-p/75 Ohms				BNC only
					Horizontal Sync.			(Positive/Negative)
					Vertical Sync.			(Positive/Negative)
			: Composite Sync. TTL Level					(Positive/Negative)
			: Composite Sync. On Green Video 0.3Vp-p (Negative)

	RGB Output Terminals	BNC (R,G,B, H/CS and V)
	THROUGH OUT	RGB THROUGHOUT (RGB2 only)

	Video Input Terminals	1.0Vp-p, 75 Ohms unbalanced (BNC-Jack), Composite video signal, Sync-negative.
	VIDEO	Y : 1.0Vp-p, 75 Ohms unbalanced, Sync-negative.
	S-VIDEO	C : 0.28Vp-p, 75 Ohms unbalanced, Color burst level.
	Video Output Terminals
	THROUGH OUT	1.0Vp-p, 75 Ohms unbalanced (BNC Jack), Composite video signal, Sync-negative.
	THROUGH OUT (S-VIDEO)	Y : 1.0Vp-p, 75 Ohms unbalanced, Sync-negative.
		C : 0.28Vp-p, 75 Ohms unbalanced, Color burst level.
	External Control	mini D-SUB 15pin (IN/THROUGH OUT)
	(IN/THROUGH OUT)	Open/Short, RS-232C Control
	Synchronization Range	Horizontal : 15.5 to 68.7 KHz (automatic : step scan)
		Vertical : 46.0 to 85.0 Hz (automatic : step scan)
	Maximum Resolution	RGB : 853( H) X			480(V) pixels

	Power Supply	100-120 VAC, 50/60 Hz

	Current Rating	7.4A (maximum)
	Power consumption	520W (typical)
	Dimensions	47.8(W) x 28.6(H) x 5.1(D) inches / 1214(W) X 727(H) X129(D) mm
	Weight	101.4lbs/46kg
	Environmental Considerations	Operating Temperature				:	0to 40
					Humidity	:	20 to 80%
					Altitude	:	0 to 6233 feet(1900m)
		Storage Temperature				:	-10 to 50
					Humidity	:	10 to 90%
					Altitude	:	0 to 9842 feet(3000m)

	Regulations :	UL/C-ULApproved (UL 1950/CSA 950)
		DOC Canada requirements
		Meets FCC class A requirements

All specifications are subject to change without notice.

49

Image 49

NEC 42PD2, 50PD1, 50PD1, 42PD2 user manual PlasmaSync 50PD1 Model PX-50VP1A

Contents

User’s Manual Important Information Precautions To avoid damage and prolong operating life DOC avis de conformation PrécautionsMises en garde et précautions de sécurité Remarque What is Covered and What is not Covered Limited Warranty Plasma Monitors Contents Pulling Out and Reinserting the Retractable Feet Ventilation Requirements for en- closure mounting Contents of the Package Features you’ll enjoy includeIntroduction Introduction to the PlasmaSync 42PD2/50PD1 Connect the equipment Setup Procedure Housing the Remote Control in the Remote Control Holder Attaching the Remote Control HolderOpening the Terminal Board Cover Removing the Terminal Board Cover Front View Part Names and Functions Side View.... Terminal Board L/R AC in connector11 RGB3 DVI 29pin Remote Mini jack Remote Controller Battery Installation and Replacement Remote control transmitterVisual Normal button Raster Normal button Operating Range Using the wired remote control mode DIP Switch Functions and Settings Making the DIP Switch Settings Power Management Modes Power Management FunctionMode Wiring Diagram Installation Connecting Your VCR DVD or Laser Disc Player Connecting Your PC or Macintosh ComputerConnecting Your Document Camera Connections with Equipment that has a Digital Interface When using the RGB2 Input When using the Video inputsDaisy-chaining Your monitors Adjustment of the Display PowerOperation General Controls About to Preset Raster Press Adjustment of the Display DirectAdjustment of the screen display position Adjustment display of the left/right position About to Preset Visual Press Adjustment of the Image List of Setting Details Adjustment of the DisplayMenu Control Settings Before Making Adjustments Press the Visual Normal button or Raster Normal button About to Reset PressAutomatic Storage Brightness Contrast Sharpness Color Tint GAMMA2 Adjustment of the Image Visual ControlsAlign the cursor with icon Return to the main menu Position Width Adjustment of Screen Position HorizontalAlign the cursor with the desired item Position Height Adjustment of Screen Position Vertical Color Temp Color Temperature Color TempColor Temp High LOW User Align the cursor with Color Temp and set with the / buttons Gain White Level Bias Black Level Adjustment of the White Balance Exiting the adjustment Adjustment of the On-screen Display PositionOSM H-POS OSM V-POS OSM Angle OSM Display Time OSM H-POS OSM V-POS OSM Angle OSM Display Time Seconds Setting the On-screen Display OFF Time Adjustment of the Clock Frequency/Clock Phase RGB Mode StillInput Mode 4 X 3 / 16 X Normal Clock phase adjustment Fine Picture RGB Mode Source Info RGB1 ALL Visual Normal ALL Raster Normal ALL NormalPOL.NEG POL.POS When RGB input is selected Source RGB1, RGB2, RGB3 Source Info Video Mode NtscWhen video input is selected Information Screen Timer Screen SET Timer OFFPresent Time Program Menu Date on OFF Mode SET Timer on Press Proceed for Program MenuAuto Timer Screen Direct Daily Weekly Cursor movement Setting Position Driver NO.1 Setting Position DriverMultiple Screens Align the cursor with icon 12 on the second Color System Other Setting ScreensAlign the cursor with icon 13 of the second Press the / buttons and set Gray Level SET ID no RGB3 ADJ ALL ResetBurning reduction function ID Selection Screen SET no256 Symptom Checks Remedy Troubleshooting PlasmaSync 42PD2 Model PX-42VP2A Specifications PlasmaSync 50PD1 Model PX-50VP1A Appendix Signal Identification For Raster Preset RGB Connections Application Communication Format Communication ParametersPage Page Page Page Page Page Page Page Page Cabinet dimensions Unit inchmm